way/pigway-yahboom-cooling-hat
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 2 Wiki Activity

2 Releases 2 Tags

RSS Feed
  • v1.0.1 7b3b5907c7
    Compare

    PIGWay Yahboom Cooling HAT v1.0.1 Stable

    way released this 2026-09-27 23:54:01 +08:00 | 2 commits to main since this release

    中文

    • 修复告警集合缩短后 OLED 页码可能残留旧像素的问题。
    • 告警新增或恢复时，在短暂间隔后确认写入第二个完整 OLED 帧。
    • 正常主页和稳定告警页面仍按配置的刷新周期写入，不增加持续 I2C 压力。
    • 不修改风扇、RGB 或 MCU 控制协议。

    English

    • Fixes stale OLED page-count pixels after the active alert set shrinks.
    • Confirms an alert-topology change with a second complete OLED frame after a short interval.
    • Stable home and alert pages retain the configured refresh interval without additional continuous I2C traffic.
    • Fan, RGB, and MCU control protocols are unchanged.
    Downloads
  • v1.0.0 c801b6c80d
    Compare

    PIGWay Yahboom Cooling HAT v1.0.0 Stable

    way released this 2026-09-27 23:18:05 +08:00 | 4 commits to main since this release

    中文

    首个正式版本

    • Yahboom RGB Cooling HAT 的独立风扇、OLED 和 RGB 控制。
    • Device Agent 或 Console 不可用时，本机温控和显示仍继续运行。
    • 本机接入接口为可选功能，默认关闭。
    • 按告警类别配置 MCU 内置呼吸颜色，并保留保守的自定义 RGB 闪烁。
    • 保留已校准的 MCU 控制协议和随包 OLED 字体。
    sudo ./install.sh
# 仅在需要连接本机 Agent 时启用：
sudo ./install.sh --enable-integration

    English

    First stable release

    • Autonomous fan, OLED, and RGB control for the Yahboom RGB Cooling HAT.
    • Local cooling and display continue when the Device Agent or Console is unavailable.
    • The local integration API is optional and disabled by default.
    • MCU built-in breathing colors are configurable by alert category; conservative custom RGB flashing remains available.
    • Preserves the calibrated MCU control protocol and bundled OLED font.
    sudo ./install.sh
# Enable only when local Agent integration is required:
sudo ./install.sh --enable-integration
    Downloads