fix: polish themes and language consistency

README.md

@@ -1,8 +1,8 @@
-# PIGWay Pi Control v3.6.0
+# PIGWay Pi Control v3.7.0
 
 Raspberry Pi 4B + 配套 128×32 OLED / 风扇 / RGB 散热扩展板的本机硬件监控 Agent。
 
-v3.6.0 在本地硬件监控、显示仲裁和可配置 RGB 告警基础上，增加轻量状态/日志/配置 API 与同源 Web 管理界面。
+v3.7.0 在现有本机硬件监控基础上增加多机状态、日志和配置管理；未登记其他节点时继续作为完整的单机版本运行。
 
 ## 已有核心功能
 
@@ -84,7 +84,7 @@ CHECK STORAGE
 只在 **状态发生变化** 时记录关键事件，避免每秒刷屏。例如：
 
 ```text
-level=INFO event=START version=3.6.0
+level=INFO event=START version=3.7.0
 level=INFO event=NET_SWITCH old_if=eth0 new_if=wlan0 ...
 level=WARN event=NETWORK_DOWN ...
 level=INFO event=NETWORK_RECOVERED ...
@@ -138,6 +138,36 @@ RGB 保留卖家 MCU 0x0D 寄存器协议。实机校准确认静态自定义颜
 
 Pi 红色 PWR 灯关机后恢复硬件默认亮起的行为不强行修改，可作为“系统已关机但 UPS 仍供电”的直观提示。
 
+## v3.7.0 多机监控
+
+每台机器在 `[device]` 中设置稳定标识和显示名称；保留 `auto` 时读取本机 hostname。作为 Web 聚合入口的机器可在 `[hosts]` 中登记其他已安装 PIGWay Pi Control 的节点：
+
+```ini
+[device]
+identifier = living-room
+name = 客厅树莓派
+
+[hosts]
+study = http://192.168.1.20:6001
+nas-room = http://192.168.1.21:6001
+```
+
+未设置 `[hosts]` 时，API 和 Web 保持单机使用方式。聚合入口通过各节点现有 HTTP API 读取状态、journal 和配置；节点不可达时会在机器卡片上显示离线，不影响其他节点。
+
+新增接口：
+
+```text
+GET /api/v1/hosts
+PUT /api/v1/hosts
+GET /api/v1/fleet/status
+GET /api/v1/fleet/logs
+PUT /api/v1/fleet/config
+```
+
+运行状态按机器显示独立卡片，包括机器标识、hostname、型号、序列号、板卡版本、操作系统、内核、架构、CPU 核数和 Agent 版本。内存和根分区同时显示百分比、已用量、总量及可用/剩余量；Wi-Fi 以 0–100% 为主值，并保留原始 dBm。OLED 的 Wi-Fi 主值同样使用百分比。
+
+事件日志增加机器列、机器筛选和机器排序。系统配置可选择目标机器；批量同步只发送当前已修改的配置项，并逐台返回成功或失败结果。远端 Bearer Token 只保存在当前浏览器的 localStorage 中，不写入聚合机器配置文件。
+
 ## v3.6.0 API 与 Web
 
 安装后访问：
@@ -167,6 +197,8 @@ GET /api/v1/services
 
 日志接口支持 `since`、`until` Unix 时间戳，`severity`、`event`、`search` 筛选，`timestamp` / `severity` / `event` / `message` 排序，以及 `limit` / `offset` 分页。Web 提供今天、昨天、本周、本月和全部快捷范围。日志直接读取 systemd journal 的现有保留数据，不建立重复的 SQLite 日志副本。
 
+Web 界面支持中文和 English 切换，并将结构化 journal 事件类型显示为当前界面的语言；journal 内部稳定的事件标识保持不变，便于脚本筛选。外观可选择自动、深色或浅色，自动模式跟随浏览器/操作系统配色。语言和外观偏好只保存在当前浏览器中。
+
 配置写入接口：
 
 ```text
@@ -240,3 +272,4 @@ sudo /usr/local/sbin/pigway-pi-control --diagnose
 - v3.2.0：主网络接口 / Wi-Fi RSSI / ETH速率 / 双网切换
 - v3.5.0：System Health、显示仲裁与可配置 RGB 告警
 - **v3.6.0：轻量状态/日志/配置 API 与同源 Web 管理界面**
+- **v3.7.0：多机状态卡片、聚合日志、机器配置选择与批量同步**

SHA256SUMS

@@ -1,10 +1,10 @@
-78e914f6fa8e86c4eb09bae63e7e9566d404941a275f7808e7e5f433f95c6edb  README.md
+96dfd20c3ad16ca62a46d66eb5ffb82b1f7f987e66c4dae5310609b1989b7dae  README.md
 72c46162c33f9587c6ccb01ad53fbaaf4ecec8cd21014b909e87e8707e253e36  app/oled_font_5x7.bin
-ba34a479584345590f1903851b6d7e13000c4034c0c9db39e591eb4382be4229  app/pigway_pi_control.py
-a833c5598813b3695ac5a65daacf7b503abd8036f20f2e6cb75d8a99307a1095  app/pigway_pi_control_api.py
-72dc248b8f7020b81bc4069e52cc11175a7b42e00d3b484cb6ca5beca624a90b  config/pigway-pi-control.conf
-f34eac1df180a3da3a6998d650c06435fd89728c10b090f6162df82e53986dd0  install.sh
+d0fa68951097a90eb6f51b36e56dc935d8fd7632c3de0ad6bff0b448960a7c03  app/pigway_pi_control.py
+034931590d83969f9f24222cc57800ab193588beea3d3dcedb98f1690000370d  app/pigway_pi_control_api.py
+ee0f682e8016f75f906d974f00c3e3340edddf30447d441ddfd61a7a34c9e83c  config/pigway-pi-control.conf
+f9fbb4defa45b43abe0ce66973b1f4d553369b3a43c01d04f206c573f7dc96ca  install.sh
 4f6e8db3698a62f57823d3298a0e6814593de6fa3d31e4751b7ea4a76e553e35  systemd/pigway-pi-control.service
 aa21cef9a06593371ccff005335b6c0c826fbf4b5c48e4255b5f4b75ce6e9217  systemd/pigway-pi-control-api.service
 9f59e7313ee58e687ae6dd29d175c67082674254ac5c5f54168b2735b64c20a4  uninstall.sh
-1255575ab76939073e83cfc728989b88facc7cc16b147870fd0d7d380bcf6b1e  web/index.html
+3a40109f11bea2d44e9d61bed4a90499a5047c4fc534f97aaa90becbf9e57017  web/index.html

app/pigway_pi_control.py

@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
-import time,socket,subprocess,configparser,signal,re,errno,threading,argparse,json
+import time,socket,subprocess,configparser,signal,re,errno,threading,argparse,json,os,platform
 from pathlib import Path
-APP_VERSION="3.6.0"
+APP_VERSION="3.7.0"
 from smbus2 import SMBus
 from PIL import Image
 from shutil import disk_usage
@@ -29,6 +29,41 @@ def load_average():
         x=Path("/proc/loadavg").read_text().split();return (float(x[0]),float(x[1]),float(x[2]))
     except Exception:return (0.0,0.0,0.0)
 
+def memory_usage():
+    try:
+        values={}
+        for line in Path("/proc/meminfo").read_text().splitlines():
+            key,value=line.split(":",1); values[key]=int(value.split()[0])*1024
+        total=values["MemTotal"]; available=values.get("MemAvailable",values.get("MemFree",0))
+        used=max(0,total-available)
+        return total,used,available,(used*100.0/total if total else 0.0)
+    except Exception:return 0,0,0,0.0
+
+def wifi_percent(metric):
+    try:return max(0,min(100,round((float(metric)+100.0)*2.0)))
+    except Exception:return None
+
+def device_details():
+    info={}
+    try:
+        for line in Path("/proc/cpuinfo").read_text().splitlines():
+            if ":" in line:
+                key,value=(x.strip() for x in line.split(":",1))
+                if key in ("Serial","Revision","Hardware","Model"): info[key.lower()]=value
+    except Exception: pass
+    try: info["model"]=Path("/proc/device-tree/model").read_bytes().rstrip(b"\0").decode()
+    except Exception: pass
+    try:
+        os_release={}
+        for line in Path("/etc/os-release").read_text().splitlines():
+            if "=" in line:
+                key,value=line.split("=",1); os_release[key]=value.strip().strip('"')
+        info["os"]=os_release.get("PRETTY_NAME",platform.platform())
+    except Exception: info["os"]=platform.platform()
+    info.update({"hostname":socket.gethostname(),"kernel":platform.release(),
+                 "architecture":platform.machine(),"cpu_count":os.cpu_count() or 0})
+    return info
+
 def cpu_freq_mhz():
     for q in ("/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq","/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq"):
         try:return int(Path(q).read_text().strip())/1000.0
@@ -224,6 +259,12 @@ def cf(section,key,default,cast=float):
     try: return cast(cfg.get(section,key))
     except: return default
 
+DEVICE_ID=cf("device","identifier","auto",str).strip()
+if not DEVICE_ID or DEVICE_ID.lower()=="auto": DEVICE_ID=socket.gethostname()
+DEVICE_NAME=cf("device","name",DEVICE_ID,str).strip() or DEVICE_ID
+if DEVICE_NAME.lower()=="auto": DEVICE_NAME=DEVICE_ID
+DEVICE_INFO=device_details()
+
 SENSOR_INTERVAL=cf("timing","sensor_interval",1.0)
 OLED_REFRESH=cf("timing","oled_refresh_interval",1.0)
 PAGE_INTERVAL=cf("timing","page_interval",10.0)
@@ -306,6 +347,7 @@ def check_watch(w):
 def diagnose():
     print("Agent:")
     print(f"version={APP_VERSION} uptime_seconds={uptime_seconds()} config={CFG}")
+    print(f"machine_id={DEVICE_ID} machine_name={DEVICE_NAME} hostname={socket.gethostname()}")
     print("loop_errors=UNAVAILABLE i2c_errors=UNAVAILABLE scope=separate_diagnostic_process")
     print("System:")
     print(f"load_average={load_average()} cpu_freq_mhz={cpu_freq_mhz():.0f} root_readonly={root_readonly()}")
@@ -318,7 +360,7 @@ def diagnose():
     if "error" in power: print("error="+power["error"])
     iface,kind,metric,label,address=primary_network()
     print("Network:")
-    print(f"primary_interface={iface or 'NONE'} kind={kind} metric={metric} ip_label={label} IP={address} internet={internet()}")
+    print(f"primary_interface={iface or 'NONE'} kind={kind} metric={metric} signal_percent={wifi_percent(metric) if kind=='WIF' else 'N/A'} ip_label={label} IP={address} internet={internet()}")
     print("I2C:")
     # SMBus receive-byte performs a read only; no register selection or display commands.
     try:
@@ -491,10 +533,11 @@ def render_home(cpu,temp,mem,disk):
         f"DSK {disk:.1f}%",
         ip_label+" "+display_ip,
     ]
+    signal=wifi_percent(net_metric) if net_kind=="WIF" else None
     right=[
         f"MEM {mem:.1f}%",
         f"FAN {FAN_NAME[fan_level]}",
-        f"{net_kind} {net_metric}",
+        f"WIF {signal}%" if signal is not None else f"{net_kind} {net_metric}",
         "",
     ]
     for row in range(4):
@@ -729,14 +772,24 @@ def cleanup():
 
 def write_status(cpu,temp,mem,disk):
     display_state=display.status_snapshot()
+    memory_total,memory_used,memory_available,memory_calculated=memory_usage()
+    disk_total,disk_used,disk_free=disk_usage("/")
+    signal=wifi_percent(net_metric) if net_kind=="WIF" else None
     state={
         "version":APP_VERSION,"timestamp":int(time.time()),"uptime_seconds":uptime_seconds(),
+        "machine":{"id":DEVICE_ID,"name":DEVICE_NAME,"hostname":socket.gethostname()},
+        "device":DEVICE_INFO,
         "system":{"load_average":load_average(),"cpu_percent":round(cpu,1),
                   "cpu_freq_mhz":round(cpu_freq_mhz()),"temperature_c":round(temp,1),
-                  "memory_percent":round(mem,1),"disk_percent":round(disk,1),
+                  "memory_percent":round(memory_calculated if memory_total else mem,1),
+                  "memory_total_bytes":memory_total,"memory_used_bytes":memory_used,
+                  "memory_available_bytes":memory_available,
+                  "disk_percent":round(disk,1),"disk_total_bytes":disk_total,
+                  "disk_used_bytes":disk_used,"disk_free_bytes":disk_free,
                   "root_readonly":bool(fs_readonly),"fan_level":fan_level,"fan_name":FAN_NAME[fan_level]},
         "power":health,
         "network":{"interface":net_iface,"kind":net_kind,"metric":net_metric,
+                   "signal_percent":signal,
                    "ip_label":ip_label,"ip":ip,"link":bool(link_ok),"internet":bool(net_ok)},
         "watches":[{"type":w[0],"name":w[1],"target":w[2],"up":bool(ok)}
                    for w,ok in zip(watches,watch_state)],

app/pigway_pi_control_api.py

@@ -1,16 +1,18 @@
 #!/usr/bin/env python3
-import configparser,ipaddress,json,re,secrets,shutil,subprocess,threading,time
+import configparser,ipaddress,json,re,secrets,shutil,subprocess,threading,time,socket
+from concurrent.futures import ThreadPoolExecutor,as_completed
 from http import HTTPStatus
 from http.server import BaseHTTPRequestHandler,ThreadingHTTPServer
 from pathlib import Path
-from urllib.parse import parse_qs,urlparse
+from urllib.parse import parse_qs,urlencode,urlparse
+from urllib.request import Request,urlopen
 
-APP_VERSION="3.6.0"
+APP_VERSION="3.7.0"
 CFG=Path("/etc/pigway-pi-control.conf")
 STATUS=Path("/run/pigway-pi-control/status.json")
 TOKEN=Path("/etc/pigway-pi-control-api.token")
 WEB=Path("/usr/local/share/pigway-pi-control/web/index.html")
-ALLOWED_SECTIONS={"services","processes","alerts","fan","led","timing","dark_mode","display","api"}
+ALLOWED_SECTIONS={"device","hosts","services","processes","alerts","fan","led","timing","dark_mode","display","api"}
 NAME_RE=re.compile(r"^[A-Za-z0-9_.-]{1,64}$")
 UNIT_RE=re.compile(r"^[A-Za-z0-9_.@:-]{1,128}\.service$")
 RGB_KEY_RE=re.compile(r"^(cpu|power|memory|storage|network|service|normal)_[rgb]$")
@@ -19,6 +21,67 @@ NORMAL_MODES={"off","solid","flash","flow","breathe","marquee","rainbow","colorf
 EFFECT_COLORS={"red","green","blue","yellow","purple","cyan","white"}
 PROTECTED_UNITS={"pigway-pi-control-api.service"}
 
+def machine_identity():
+    cfg=load_cfg(); identifier=cfg.get("device","identifier",fallback="auto").strip()
+    if not identifier or identifier.lower()=="auto": identifier=socket.gethostname()
+    name=cfg.get("device","name",fallback=identifier).strip() or identifier
+    if name.lower()=="auto": name=identifier
+    return {"id":identifier,"name":name,"hostname":socket.gethostname(),"local":True,"url":""}
+
+def normalize_url(value):
+    parsed=urlparse(str(value).strip())
+    if parsed.scheme not in {"http","https"} or not parsed.hostname or parsed.username or parsed.password:
+        raise ValueError("host URL must be an http(s) URL without credentials")
+    return f"{parsed.scheme}://{parsed.netloc}".rstrip("/")
+
+def host_registry():
+    local=machine_identity(); result=[local]
+    cfg=load_cfg()
+    if cfg.has_section("hosts"):
+        for host_id,url in cfg.items("hosts"):
+            try: base=normalize_url(url)
+            except ValueError: continue
+            if host_id==local["id"]: continue
+            result.append({"id":host_id,"name":host_id,"hostname":"","local":False,"url":base})
+    return result
+
+def find_host(host_id):
+    for host in host_registry():
+        if host["id"]==host_id:return host
+    raise ValueError("unknown host")
+
+def remote_json(base,path,method="GET",payload=None,token=""):
+    data=None if payload is None else json.dumps(payload,separators=(",",":")).encode()
+    headers={"Accept":"application/json"}
+    if data is not None: headers["Content-Type"]="application/json"
+    if token: headers["Authorization"]=f"Bearer {token}"
+    request=Request(base+path,data=data,headers=headers,method=method)
+    with urlopen(request,timeout=5) as response:
+        return json.loads(response.read())
+
+def fleet_status():
+    hosts=host_registry(); results=[]
+    try:
+        status=json.loads(STATUS.read_text())
+        status.setdefault("machine",machine_identity())
+        results.append({"host":hosts[0],"online":True,"status":status})
+    except Exception as exc:
+        results.append({"host":hosts[0],"online":False,"error":str(exc)})
+    def fetch(host):
+        try:
+            status=remote_json(host["url"],"/api/v1/status")
+            machine=status.get("machine",{})
+            merged={**host,"name":machine.get("name") or host["name"],"hostname":machine.get("hostname","")}
+            return {"host":merged,"online":True,"status":status}
+        except Exception as exc:return {"host":host,"online":False,"error":str(exc)}
+    peers=hosts[1:]
+    with ThreadPoolExecutor(max_workers=min(8,max(1,len(peers)))) as pool:
+        futures=[pool.submit(fetch,h) for h in peers]
+        for future in as_completed(futures): results.append(future.result())
+    order={h["id"]:i for i,h in enumerate(hosts)}
+    results.sort(key=lambda x:order.get(x["host"]["id"],999))
+    return {"hosts":results,"timestamp":int(time.time())}
+
 def load_cfg():
     cfg=configparser.ConfigParser(); cfg.read(CFG)
     return cfg
@@ -32,7 +95,7 @@ def config_json():
     return {section:dict(cfg.items(section)) for section in cfg.sections() if section in ALLOWED_SECTIONS}
 
 def validate_value(section,key,value,existing):
-    if section not in {"services","processes"} and key not in existing.get(section,set()):
+    if section not in {"services","processes","hosts"} and key not in existing.get(section,set()):
         raise ValueError(f"unsupported option: {section}.{key}")
     if RGB_KEY_RE.fullmatch(key):
         number=int(value)
@@ -54,6 +117,42 @@ def validate_value(section,key,value,existing):
         if not 1<=number<=1000: raise ValueError("api.log_limit must be 1..1000")
     elif section=="api" and key=="bind":
         ipaddress.ip_address(value)
+    elif section=="device" and key=="identifier" and value.lower()!="auto" and not NAME_RE.fullmatch(value):
+        raise ValueError("device.identifier must be auto or 1..64 letters, numbers, dot, underscore or dash")
+    elif section=="hosts":
+        normalize_url(value)
+
+def replace_ini_value(section,key,value):
+    text=CFG.read_text()
+    section_match=re.search(rf"(?mi)^\[{re.escape(section)}\]\s*$",text)
+    if not section_match:
+        if value is not None: text=text.rstrip()+f"\n\n[{section}]\n{key} = {value}\n"
+        return text
+    next_section=re.search(r"(?m)^\[.+\]\s*$",text[section_match.end():])
+    end=section_match.end()+(next_section.start() if next_section else len(text)-section_match.end())
+    chunk=text[section_match.end():end]
+    key_match=re.search(rf"(?mi)^\s*{re.escape(key)}\s*=.*(?:\n|$)",chunk)
+    if key_match:
+        start=section_match.end()+key_match.start(); stop=section_match.end()+key_match.end()
+        return text[:start]+((f"{key} = {value}\n") if value is not None else "")+text[stop:]
+    if value is not None:return text[:end].rstrip()+f"\n{key} = {value}\n\n"+text[end:].lstrip("\n")
+    return text
+
+def save_ini_text(text,prefix="api"):
+    parsed=configparser.ConfigParser(); parsed.read_string(text)
+    backup=CFG.with_name(f"{CFG.name}.bak.{prefix}-{time.strftime('%Y%m%d-%H%M%S')}")
+    shutil.copy2(CFG,backup)
+    temporary=CFG.with_suffix(".tmp"); temporary.write_text(text); temporary.chmod(0o644); temporary.replace(CFG)
+    return str(backup)
+
+def edit_host(operation,host_id,url=""):
+    if operation not in {"save","delete"}: raise ValueError("invalid host operation")
+    if not NAME_RE.fullmatch(host_id): raise ValueError("invalid host identifier")
+    local=machine_identity()["id"]
+    if host_id==local: raise ValueError("local host cannot be changed in the remote host list")
+    if operation=="save": url=normalize_url(url)
+    text=replace_ini_value("hosts",host_id,url if operation=="save" else None)
+    return save_ini_text(text,"hosts")
 
 def update_ini(updates):
     if not isinstance(updates,dict): raise ValueError("updates must be an object")
@@ -125,6 +224,50 @@ def journal_query(since=None,until=None,severity="",event="",search="",sort="tim
     return {"logs":rows[offset:offset+limit],"total":total,"offset":offset,"limit":limit,
             "event_types":event_types,"retention":"systemd-journal"}
 
+def fleet_journal_query(since=None,until=None,severity="",event="",search="",machine="",
+                        sort="timestamp",order="desc",limit=100,offset=0):
+    hosts=host_registry(); rows=[]; event_types=set(); machines=[]
+    def decorate(payload,host):
+        machine_info=payload.get("machine") or {"id":host["id"],"name":host["name"]}
+        host_id=machine_info.get("id") or host["id"]
+        host_name=machine_info.get("name") or host["name"]
+        decorated=[]
+        for row in payload.get("logs",[]):
+            decorated.append({**row,"machine_id":host_id,"machine_name":host_name})
+        return decorated,set(payload.get("event_types",[])),{"id":host_id,"name":host_name}
+    local_payload=journal_query(since,until,severity,event,search,"timestamp","desc",50000,0)
+    local_payload["machine"]=machine_identity()
+    local_rows,local_events,local_machine=decorate(local_payload,hosts[0])
+    rows.extend(local_rows); event_types.update(local_events); machines.append(local_machine)
+    query={"limit":50000,"offset":0,"sort":"timestamp","order":"desc"}
+    for key,value in (("since",since),("until",until),("severity",severity),("event",event),("search",search)):
+        if value not in (None,""): query[key]=value
+    def fetch(host):
+        payload=remote_json(host["url"],"/api/v1/logs?"+urlencode(query))
+        try:
+            status=remote_json(host["url"],"/api/v1/status")
+            payload["machine"]=status.get("machine",{})
+        except Exception: pass
+        return decorate(payload,host)
+    peers=hosts[1:]
+    with ThreadPoolExecutor(max_workers=min(8,max(1,len(peers)))) as pool:
+        futures=[pool.submit(fetch,h) for h in peers]
+        for future in as_completed(futures):
+            try:
+                remote_rows,remote_events,remote_machine=future.result()
+                rows.extend(remote_rows); event_types.update(remote_events); machines.append(remote_machine)
+            except Exception: pass
+    if machine: rows=[row for row in rows if row["machine_id"]==machine]
+    severity_rank={"EMERGENCY":0,"ALERT":1,"CRITICAL":2,"ERROR":3,"WARN":4,"NOTICE":5,"INFO":6,"DEBUG":7}
+    keys={"timestamp":lambda x:x["timestamp"],"severity":lambda x:severity_rank.get(x["severity"],99),
+          "event":lambda x:x["event"],"message":lambda x:x["message"],
+          "machine":lambda x:(x["machine_name"],x["machine_id"])}
+    rows.sort(key=keys[sort],reverse=order=="desc")
+    total=len(rows)
+    return {"logs":rows[offset:offset+limit],"total":total,"offset":offset,"limit":limit,
+            "event_types":sorted(event_types),"machines":sorted(machines,key=lambda x:(x["name"],x["id"])),
+            "retention":"systemd-journal"}
+
 def service_inventory():
     cfg=load_cfg()
     monitored={target.lower():(name,target) for name,target in cfg.items("services")} if cfg.has_section("services") else {}
@@ -205,7 +348,7 @@ def control_service(unit,action):
     if result.returncode: raise RuntimeError(result.stderr.strip() or f"systemctl {action} failed")
 
 class Handler(BaseHTTPRequestHandler):
-    server_version="PIGWayAPI/3.6"
+    server_version="PIGWayAPI/3.7"
 
     def log_message(self,fmt,*args):
         return
@@ -240,37 +383,75 @@ class Handler(BaseHTTPRequestHandler):
                 self.send_header("Content-Length",str(len(data))); self.security_headers(); self.end_headers(); self.wfile.write(data); return
             if parsed.path=="/api/v1/health":
                 self.send_json(200,{"ok":True,"version":APP_VERSION,"status_available":STATUS.exists()}); return
+            if parsed.path=="/api/v1/hosts":
+                self.send_json(200,{"hosts":host_registry()}); return
+            if parsed.path=="/api/v1/fleet/status":
+                self.send_json(200,fleet_status()); return
             if parsed.path=="/api/v1/status":
                 if not STATUS.exists(): self.send_json(503,{"error":"agent status unavailable"}); return
                 self.send_json(200,json.loads(STATUS.read_text())); return
-            if parsed.path=="/api/v1/logs":
+            if parsed.path in {"/api/v1/logs","/api/v1/fleet/logs"}:
                 query=parse_qs(parsed.query)
                 value=lambda key,default="":query.get(key,[default])[0]
-                limit=min(max(int(value("limit",api_setting("log_limit",200,int))),1),500)
+                limit=min(max(int(value("limit",api_setting("log_limit",200,int))),1),50000)
                 offset=max(int(value("offset",0)),0)
                 since=int(value("since")) if value("since") else None
                 until=int(value("until")) if value("until") else None
                 if since is not None and until is not None and since>until: raise ValueError("since must not be after until")
                 sort=value("sort","timestamp"); order=value("order","desc")
-                if sort not in {"timestamp","severity","event","message"}: raise ValueError("invalid log sort")
+                allowed_sort={"timestamp","severity","event","message"}
+                if parsed.path=="/api/v1/fleet/logs": allowed_sort.add("machine")
+                if sort not in allowed_sort: raise ValueError("invalid log sort")
                 if order not in {"asc","desc"}: raise ValueError("invalid log order")
                 severity=value("severity").upper(); event=value("event"); search=value("search")
                 if len(event)>80 or len(search)>120: raise ValueError("log filter is too long")
+                if parsed.path=="/api/v1/fleet/logs":
+                    self.send_json(200,fleet_journal_query(since,until,severity,event,search,value("machine"),sort,order,limit,offset)); return
                 self.send_json(200,journal_query(since,until,severity,event,search,sort,order,limit,offset)); return
             if parsed.path=="/api/v1/config":
-                self.send_json(200,{"config":config_json(),"write_requires_token":True}); return
+                query=parse_qs(parsed.query); host_id=query.get("host",[""])[0]
+                if host_id and host_id!=machine_identity()["id"]:
+                    host=find_host(host_id); self.send_json(200,remote_json(host["url"],"/api/v1/config")); return
+                self.send_json(200,{"config":config_json(),"write_requires_token":True,"machine":machine_identity()}); return
             if parsed.path=="/api/v1/services":
-                self.send_json(200,{"services":service_inventory()}); return
+                query=parse_qs(parsed.query); host_id=query.get("host",[""])[0]
+                if host_id and host_id!=machine_identity()["id"]:
+                    host=find_host(host_id); self.send_json(200,remote_json(host["url"],"/api/v1/services")); return
+                self.send_json(200,{"services":service_inventory(),"machine":machine_identity()}); return
             self.send_json(404,{"error":"not found"})
         except ValueError as e: self.send_json(400,{"error":str(e)})
         except Exception as e: self.send_json(500,{"error":str(e)})
 
     def do_PUT(self):
         path=urlparse(self.path).path
-        if path not in {"/api/v1/config","/api/v1/services","/api/v1/services/control"}: self.send_json(404,{"error":"not found"}); return
+        if path not in {"/api/v1/config","/api/v1/services","/api/v1/services/control","/api/v1/hosts","/api/v1/fleet/config"}: self.send_json(404,{"error":"not found"}); return
         if not self.authorized(): self.send_json(401,{"error":"bearer token required"}); return
         try:
             body=self.read_json()
+            if path=="/api/v1/hosts":
+                backup=edit_host(str(body.get("operation","")),str(body.get("id","")),str(body.get("url","")))
+                self.send_json(200,{"ok":True,"backup":backup,"hosts":host_registry()}); return
+            if path=="/api/v1/fleet/config":
+                updates=body.get("updates"); targets=body.get("targets",[]); tokens=body.get("tokens",{})
+                if not isinstance(targets,list) or not targets or len(targets)>32: raise ValueError("targets must contain 1..32 host identifiers")
+                if not isinstance(tokens,dict): raise ValueError("tokens must be an object")
+                results=[]; local_id=machine_identity()["id"]; restart_local_api=False
+                for host_id in dict.fromkeys(str(x) for x in targets):
+                    try:
+                        if host_id==local_id:
+                            backup=update_ini(updates)
+                            subprocess.run(["systemctl","restart","pigway-pi-control.service"],check=True,timeout=10)
+                            restart_local_api="api" in updates
+                            results.append({"id":host_id,"ok":True,"backup":backup})
+                        else:
+                            host=find_host(host_id); token=str(tokens.get(host_id,""))
+                            if not token: raise ValueError("remote bearer token required")
+                            response=remote_json(host["url"],"/api/v1/config","PUT",{"updates":updates},token)
+                            results.append({"id":host_id,"ok":True,"backup":response.get("backup","")})
+                    except Exception as exc: results.append({"id":host_id,"ok":False,"error":str(exc)})
+                self.send_json(200,{"ok":all(x["ok"] for x in results),"results":results})
+                if restart_local_api: threading.Timer(0.2,self.server.shutdown).start()
+                return
             if path=="/api/v1/services/control":
                 control_service(str(body.get("unit","")),str(body.get("action","")))
                 print(f"SERVICE_CONTROL action={body.get('action')} unit={body.get('unit')}",flush=True)

config/pigway-pi-control.conf

@@ -1,5 +1,5 @@
 # =============================================================================
-# PIGWay Pi Control v3.6.0 - 用户配置文件
+# PIGWay Pi Control v3.7.0 - 用户配置文件
 # =============================================================================
 #
 # 正式安装后的配置路径：
@@ -25,6 +25,22 @@
 # =============================================================================
 
 
+[device]
+# 多机监控中使用的稳定机器标识。auto 表示读取本机 hostname。
+# 多台机器的 identifier 必须唯一；修改后重启硬件 Agent 和 API 服务。
+identifier = auto
+
+# Web 页面显示名称。auto 表示使用 identifier。
+name = auto
+
+
+[hosts]
+# 在作为聚合入口的机器上登记其他节点，每行格式：
+# 唯一标识 = http://节点IP:6001
+# 示例：
+# living-room = http://192.168.1.20:6001
+
+
 [api]
 # API 与 Web 使用同一监听地址和端口。0.0.0.0 允许局域网访问；
 # 如只允许本机访问可改为 127.0.0.1。修改后重启 API 服务生效。

install.sh

@@ -102,6 +102,8 @@ from pathlib import Path
 path=Path(sys.argv[1])
 text=path.read_text()
 sections={
+"device":(("identifier","auto"),("name","auto")),
+"hosts":(),
 "led":(
     ("normal_mode","off"),
     ("normal_r",0),("normal_g",0),("normal_b",0),
@@ -163,7 +165,7 @@ echo "[7/8] 安装后自检..."
 FAIL=0
 check() { local label="$1"; shift; if "$@"; then printf "  %-30s PASS\n" "$label"; else printf "  %-30s FAIL\n" "$label"; FAIL=1; fi; }
 APP=/usr/local/sbin/pigway-pi-control
-check "Version 3.6.0" grep -Fq 'APP_VERSION="3.6.0"' "$APP"
+check "Version 3.7.0" grep -Fq 'APP_VERSION="3.7.0"' "$APP"
 check "OLED physical 128x32" grep -Fq 'W,H=128,32' "$APP"
 check "OLED MUX 0x1F" grep -Fq '0xA8,0x1F' "$APP"
 check "OLED pages 0..3" grep -Fq 'cmd(0x22);cmd(0);cmd(3)' "$APP"
@@ -178,7 +180,7 @@ else
 fi
 check "Service running" systemctl is-active --quiet pigway-pi-control.service
 check "API/Web service running" systemctl is-active --quiet pigway-pi-control-api.service
-check "API/Web version 3.6.0" grep -Fq 'APP_VERSION="3.6.0"' /usr/local/sbin/pigway-pi-control-api
+check "API/Web version 3.7.0" grep -Fq 'APP_VERSION="3.7.0"' /usr/local/sbin/pigway-pi-control-api
 check "Web UI installed" test -s /usr/local/share/pigway-pi-control/web/index.html
 check "P0 health monitor" grep -Fq 'throttled_state' "$APP"
 check "Diagnostic command" grep -Fq -- '--diagnose' "$APP"

web/index.html

@@ -8,54 +8,89 @@
 </style>
 <style>
 .log-filter{display:grid;grid-template-columns:repeat(5,minmax(0,1fr));gap:10px;align-items:end}.log-filter label{color:var(--muted);font-size:12px}.log-filter input,.log-filter select{width:100%;margin-top:5px;border:1px solid var(--line);border-radius:7px;background:#0d151e;color:var(--text);padding:9px}.quick-range{display:flex;gap:7px;flex-wrap:wrap;margin:12px 0}.log-table-wrap{overflow:auto;border:1px solid var(--line);border-radius:9px}.log-table{width:100%;border-collapse:collapse;min-width:760px}.log-table th,.log-table td{text-align:left;padding:10px;border-bottom:1px solid #203040;vertical-align:top}.log-table th{position:sticky;top:0;background:#152130;z-index:1}.sort-button{border:0;background:transparent;padding:0;font-weight:700}.sort-button:hover{background:transparent}.log-message{font:12px/1.5 ui-monospace,SFMono-Regular,monospace;white-space:pre-wrap;word-break:break-word}.log-pager{display:flex;justify-content:space-between;align-items:center;gap:10px;margin-top:12px}@media(max-width:800px){.log-filter{grid-template-columns:1fr 1fr}}@media(max-width:470px){.log-filter{grid-template-columns:1fr}}
+.header-actions{display:flex;align-items:center;gap:12px;flex-wrap:wrap;justify-content:flex-end}.preference{display:grid;gap:4px;color:var(--muted);font-size:12px}.preference select{height:35px;border:1px solid var(--line);border-radius:7px;background:#0d151e;color:var(--text);padding:7px 28px 7px 9px}.header-actions .live{align-self:flex-end;height:35px}.service-list{scrollbar-width:none}.service-list:hover{scrollbar-width:thin;scrollbar-color:var(--line) transparent}.service-list::-webkit-scrollbar{width:0}.service-list:hover::-webkit-scrollbar{width:7px}.service-list::-webkit-scrollbar-track{background:transparent}.service-list::-webkit-scrollbar-thumb{background:var(--line);border-radius:999px}[data-theme="light"]{color-scheme:light;--bg:#eef3f8;--panel:#fff;--panel2:#f6f9fc;--line:#c8d4e0;--text:#172333;--muted:#5d7085;--good:#168653;--bad:#c93d3d;--blue:#176fc1}[data-theme="light"] body{background:radial-gradient(circle at top right,#d9e9f8 0,#eef3f8 45%)}[data-theme="light"] nav{background:#eef3f8e8}[data-theme="light"] button{background:#e7eef6}[data-theme="light"] button:hover,[data-theme="light"] button.active{background:#d9e9f8}[data-theme="light"] .card,[data-theme="light"] .panel,[data-theme="light"] .group{box-shadow:0 10px 24px #3452}[data-theme="light"] .field input,[data-theme="light"] .field select,[data-theme="light"] .service-form input,[data-theme="light"] .service-search,[data-theme="light"] .toolbar input,[data-theme="light"] .log-filter input,[data-theme="light"] .log-filter select,[data-theme="light"] .preference select{background:#fff}[data-theme="light"] .badge{background:#e5edf5;color:#31465c}[data-theme="light"] .badge.good{background:#d9f3e5;color:#087444}[data-theme="light"] .badge.bad{background:#fde5e5;color:#b72f2f}[data-theme="light"] .savebar{background:#f7fafcef;box-shadow:0 8px 25px #3453}[data-theme="light"] .log-table th{background:#e7eef6}[data-theme="light"] .row,[data-theme="light"] .log-table th,[data-theme="light"] .log-table td,[data-theme="light"] .log,[data-theme="light"] .service-list{border-color:#d6e0ea}@media(max-width:470px){.header-actions{justify-content:flex-start}}.host-panel{margin-top:14px}.host-head{display:flex;justify-content:space-between;gap:16px;align-items:start;margin-bottom:12px}.device-details{display:flex;gap:8px 16px;flex-wrap:wrap;font-size:12px;color:var(--muted);margin-top:5px}.host-grid{display:grid;grid-template-columns:repeat(3,minmax(0,1fr));gap:10px}.metric{background:var(--panel2);border:1px solid var(--line);border-radius:9px;padding:12px}.metric .value{font-size:20px}.progress{height:7px;background:color-mix(in srgb,var(--line) 70%,transparent);border-radius:999px;overflow:hidden;margin:8px 0}.progress span{display:block;height:100%;background:var(--blue);border-radius:inherit}.host-select{display:grid;gap:4px;color:var(--muted);font-size:12px}.host-select select{min-width:210px;border:1px solid var(--line);border-radius:7px;background:var(--panel2);color:var(--text);padding:9px}.host-checks{display:flex;gap:12px;flex-wrap:wrap}.host-checks label{display:flex;gap:6px;align-items:center}.offline-card{border-color:var(--bad)}@media(max-width:900px){.host-grid{grid-template-columns:repeat(2,1fr)}}@media(max-width:550px){.host-grid{grid-template-columns:1fr}.host-head{flex-direction:column}}
 </style>
 </head>
 <body><main>
-<header><div><h1>PIGWay Pi Control</h1><div class="sub" id="identity">正在连接树莓派…</div></div><div class="live"><span class="dot" id="dot"></span><span id="liveText">离线</span></div></header>
+<header><div><h1>PIGWay Pi Control</h1><div class="sub" id="identity">正在连接树莓派…</div></div><div class="header-actions"><label class="preference"><span>语言</span><select id="language"><option value="zh">中文</option><option value="en">English</option></select></label><label class="preference"><span>颜色模式</span><select id="theme"><option value="auto">自动</option><option value="dark">深色</option><option value="light">浅色</option></select></label><div class="live"><span class="dot" id="dot"></span><span id="liveText">离线</span></div></div></header>
 <nav><button class="active" data-tab="overview">运行状态</button><button data-tab="logs">事件日志</button><button data-tab="config">系统配置</button></nav>
-<section id="overview"><div class="grid">
-<div class="card"><div class="muted">处理器负载</div><div class="value" id="cpu">--</div><div class="muted" id="freq">--</div></div><div class="card"><div class="muted">处理器温度</div><div class="value" id="temp">--</div><div class="muted" id="fan">--</div></div><div class="card"><div class="muted">内存占用</div><div class="value" id="memory">--</div></div><div class="card"><div class="muted">磁盘占用</div><div class="value" id="disk">--</div></div><div class="card wide"><div class="muted">主网络</div><div class="value" id="network">--</div><div class="muted" id="address">--</div></div><div class="card wide"><div class="muted">显示状态</div><div class="value" id="owner">--</div><div class="muted" id="rgb">--</div></div>
-</div><div class="panel"><h2>当前告警</h2><div class="rows" id="alerts"><div class="muted">无告警</div></div></div><div class="panel"><h2>服务与进程监控</h2><div class="rows" id="watches"></div></div></section>
-<section id="logs" class="hidden"><div class="panel"><h2>事件日志</h2><p class="muted">查询 systemd journal 中仍在保留的全部 PIGWay 硬件 Agent 事件。</p><div class="quick-range"><button data-log-range="today">今天</button><button data-log-range="yesterday">昨天</button><button data-log-range="week">本周</button><button data-log-range="month">本月</button><button data-log-range="all">全部</button></div><div class="log-filter"><label>开始日期<input id="logStart" type="date"></label><label>结束日期<input id="logEnd" type="date"></label><label>严重程度<select id="logSeverity"><option value="">全部程度</option><option value="DEBUG">调试</option><option value="INFO">信息</option><option value="NOTICE">注意</option><option value="WARN">警告</option><option value="ERROR">错误</option><option value="CRITICAL">严重</option><option value="ALERT,EMERGENCY">紧急</option></select></label><label>事件类型<select id="logEvent"><option value="">全部事件</option></select></label><label>关键词<input id="logSearch" placeholder="搜索日志内容"></label></div><div class="toolbar"><button id="refreshLogs">查询</button><button id="resetLogs">重置</button><span class="muted" id="logSummary"></span></div><div class="log-table-wrap"><table class="log-table"><thead><tr><th><button class="sort-button" data-log-sort="timestamp">时间</button></th><th><button class="sort-button" data-log-sort="severity">程度</button></th><th><button class="sort-button" data-log-sort="event">事件类型</button></th><th><button class="sort-button" data-log-sort="message">内容</button></th></tr></thead><tbody id="logRows"></tbody></table></div><div class="log-pager"><button id="logPrev">上一页</button><span class="muted" id="logPage"></span><button id="logNext">下一页</button></div></div></section>
-<section id="config" class="hidden"><div class="panel"><h2>系统配置</h2><p class="muted">配置按用途分组，只显示当前模式需要的选项。保存时会备份配置并重启硬件 Agent。</p><div class="toolbar"><input id="token" type="password" placeholder="配置写入令牌（Bearer Token）"><button id="toggleToken">显示令牌</button></div><div class="config-shell"><aside class="config-menu" id="configMenu"></aside><div id="configRows"></div></div><div class="savebar"><button id="saveConfig">保存并应用</button> <span id="saveState" class="muted">尚未修改</span></div></div></section>
+<section id="overview"><div id="hostCards"><div class="panel muted">正在读取主机状态…</div></div></section>
+<section id="logs" class="hidden"><div class="panel"><h2>事件日志</h2><p class="muted">查询 systemd journal 中仍在保留的全部硬件 Agent 事件。</p><div class="quick-range"><button data-log-range="today">今天</button><button data-log-range="yesterday">昨天</button><button data-log-range="week">本周</button><button data-log-range="month">本月</button><button data-log-range="all">全部</button></div><div class="log-filter"><label>开始日期<input id="logStart" type="date"></label><label>结束日期<input id="logEnd" type="date"></label><label>严重程度<select id="logSeverity"><option value="">全部程度</option><option value="DEBUG">调试</option><option value="INFO">信息</option><option value="NOTICE">注意</option><option value="WARN">警告</option><option value="ERROR">错误</option><option value="CRITICAL">严重</option><option value="ALERT,EMERGENCY">紧急</option></select></label><label>机器标识<select id="logMachine"><option value="">全部机器</option></select></label><label>事件类型<select id="logEvent"><option value="">全部事件</option></select></label><label>关键词<input id="logSearch" placeholder="搜索日志内容"></label></div><div class="toolbar"><button id="refreshLogs">查询</button><button id="resetLogs">重置</button><span class="muted" id="logSummary"></span></div><div class="log-table-wrap"><table class="log-table"><thead><tr><th><button class="sort-button" data-log-sort="timestamp">时间</button></th><th><button class="sort-button" data-log-sort="machine">机器</button></th><th><button class="sort-button" data-log-sort="severity">程度</button></th><th><button class="sort-button" data-log-sort="event">事件类型</button></th><th><button class="sort-button" data-log-sort="message">内容</button></th></tr></thead><tbody id="logRows"></tbody></table></div><div class="log-pager"><button id="logPrev">上一页</button><span class="muted" id="logPage"></span><button id="logNext">下一页</button></div></div></section>
+<section id="config" class="hidden"><div class="panel"><h2>系统配置</h2><p class="muted">配置按用途分组，只显示当前模式需要的选项。保存时会备份配置并重启硬件 Agent。</p><div class="toolbar"><label class="host-select">配置机器<select id="configHost"></select></label><input id="token" type="password" placeholder="当前机器配置令牌（Bearer Token）"><button id="toggleToken">显示令牌</button></div><div class="group"><div class="group-head"><div><h3>多机配置同步</h3><div class="hint">勾选目标机器后，将当前页面中已修改的配置项批量同步到这些机器。</div></div></div><div id="syncHosts" class="host-checks"></div></div><div class="config-shell"><aside class="config-menu" id="configMenu"></aside><div id="configRows"></div></div><div class="savebar"><button id="saveConfig">保存到当前机器</button> <button id="syncConfig">批量同步已修改项</button> <span id="saveState" class="muted">尚未修改</span></div></div></section>
 </main><script>
-const $=id=>document.getElementById(id),tabs=[...document.querySelectorAll('nav button')];let original={};const esc=s=>String(s??'').replace(/[&<>"']/g,c=>({'&':'&amp;','<':'&lt;','>':'&gt;','"':'&quot;',"'":'&#39;'}[c]));
-const sectionMeta={led:['灯光设置','正常灯效与告警颜色'],alerts:['告警阈值','处理器、内存、温度、磁盘和 Wi-Fi'],fan:['风扇温控','温度档位与降档回差'],timing:['刷新周期','传感器、屏幕、网络和健康检查'],display:['屏幕布局','OLED 四行文字位置'],dark_mode:['板载指示灯','树莓派电源灯与活动灯'],services:['服务监控','监控 systemd 服务'],processes:['进程监控','监控普通进程关键字'],api:['Web 与 API','监听地址、端口和日志数量']};
-const labels={'led.normal_mode':'正常状态灯效','led.normal_r':'红色通道','led.normal_g':'绿色通道','led.normal_b':'蓝色通道','led.normal_flash_on_ms':'亮灯时间','led.normal_flash_off_ms':'灭灯时间','led.normal_effect_speed':'内置效果速度','led.normal_effect_color':'内置效果颜色','led.warning_flash_on_ms':'普通告警亮灯','led.warning_flash_off_ms':'普通告警灭灯','led.critical_flash_on_ms':'严重告警亮灯','led.critical_flash_off_ms':'严重告警灭灯','led.emergency_flash_on_ms':'紧急告警亮灯','led.emergency_flash_off_ms':'紧急告警灭灯','led.write_delay_ms':'RGB 寄存器写入间隔','alerts.cpu_high':'处理器高负载阈值','alerts.cpu_recover':'处理器恢复阈值','alerts.cpu_high_seconds':'处理器持续时间','alerts.memory_high':'内存高占用阈值','alerts.memory_recover':'内存恢复阈值','alerts.memory_high_seconds':'内存持续时间','alerts.temp_high':'高温告警阈值','alerts.temp_critical':'严重高温阈值','alerts.disk_high':'磁盘高占用阈值','alerts.disk_critical':'磁盘严重阈值','alerts.wifi_weak':'Wi-Fi 弱信号阈值','alerts.wifi_recover':'Wi-Fi 恢复阈值','alerts.wifi_weak_seconds':'弱信号持续时间','fan.start':'风扇启动温度','fan.level2':'二档起始温度','fan.level3':'三档起始温度','fan.level4':'四档起始温度','fan.max':'全速起始温度','fan.hysteresis':'降档温度回差','timing.sensor_interval':'传感器采样周期','timing.oled_refresh_interval':'OLED 刷新周期','timing.page_interval':'OLED 页面轮播周期','timing.network_interval':'网络检查周期','timing.service_interval':'服务检查周期','timing.health_interval':'健康检查周期','display.row1_y':'第一行纵坐标','display.row2_y':'第二行纵坐标','display.row3_y':'第三行纵坐标','display.row4_y':'第四行纵坐标','dark_mode.pi_pwr_led':'树莓派电源灯','dark_mode.pi_act_led':'树莓派活动灯','api.bind':'监听地址','api.port':'监听端口','api.log_limit':'默认日志条数'};
+let LANG=localStorage.getItem('pigwayLanguage')||'zh';
+const EN={
+'语言':'Language','颜色模式':'Appearance','中文':'中文','自动':'Auto','深色':'Dark','浅色':'Light','正在连接树莓派…':'Connecting to Raspberry Pi…','在线':'Online','离线':'Offline',
+'运行状态':'Status','事件日志':'Event log','系统配置':'Settings','处理器负载':'CPU load','处理器温度':'CPU temperature','内存占用':'Memory usage','磁盘占用':'Disk usage','主网络':'Primary network','显示状态':'Display status','当前告警':'Active alerts','无告警':'No alerts','服务与进程监控':'Service and process monitors',
+'查询 systemd journal 中仍在保留的全部硬件 Agent 事件。':'Query all retained hardware Agent events in the systemd journal.','今天':'Today','昨天':'Yesterday','本周':'This week','本月':'This month','全部':'All','开始日期':'Start date','结束日期':'End date','严重程度':'Severity','全部程度':'All severities','调试':'Debug','信息':'Info','注意':'Notice','警告':'Warning','错误':'Error','严重':'Critical','紧急':'Emergency','事件类型':'Event type','全部事件':'All events','关键词':'Keyword','搜索日志内容':'Search log messages','查询':'Search','重置':'Reset','时间':'Time','程度':'Severity','内容':'Message','上一页':'Previous','下一页':'Next',
+'配置按用途分组，只显示当前模式需要的选项。保存时会备份配置并重启硬件 Agent。':'Settings are grouped by purpose and only relevant options are shown. Saving creates a backup and restarts the hardware Agent.','配置写入令牌（Bearer Token）':'Configuration Bearer Token','显示令牌':'Show token','隐藏令牌':'Hide token','保存并应用':'Save and apply','尚未修改':'No changes',
+'灯光设置':'Lighting','正常灯效与告警颜色':'Normal effects and alert colors','告警阈值':'Alert thresholds','处理器、内存、温度、磁盘和 Wi-Fi':'CPU, memory, temperature, disk and Wi-Fi','风扇温控':'Fan control','温度档位与降档回差':'Temperature levels and hysteresis','刷新周期':'Refresh intervals','传感器、屏幕、网络和健康检查':'Sensors, display, network and health checks','屏幕布局':'Display layout','OLED 四行文字位置':'OLED four-line positions','板载指示灯':'Board LEDs','树莓派电源灯与活动灯':'Raspberry Pi power and activity LEDs','服务监控':'Service monitoring','监控 systemd 服务':'Monitor systemd services','进程监控':'Process monitoring','监控普通进程关键字':'Monitor process keywords','Web 与 API':'Web and API','监听地址、端口和日志数量':'Bind address, port and log count',
+'正常运行灯效':'Normal lighting','没有告警时显示；告警出现后自动让位。':'Shown when no alert is active; alerts take priority.','告警对象颜色':'Alert category colors','告警对象决定颜色，严重程度决定闪烁速度。':'The alert category determines color; severity determines flash timing.','普通告警闪烁节奏':'Warning flash timing','严重告警闪烁节奏':'Critical flash timing','紧急告警闪烁节奏':'Emergency flash timing','硬件高级参数':'Advanced hardware settings','自定义颜色':'Custom color','点击色块打开色盘':'Click the swatch to open the color picker','颜色':'Color','红色通道':'Red channel','绿色通道':'Green channel','蓝色通道':'Blue channel','范围 0–255。':'Range: 0–255.','亮灯时间':'On time','灭灯时间':'Off time','毫秒':'ms','秒':'s','像素':'px','条':'entries',
+'当前系统服务':'System services','点击“加入监控”会自动填写下方表单；也可以手动输入尚未安装的未来服务。':'Click “Add monitor” to fill the form below, or enter a future service manually.','刷新列表':'Refresh list','搜索服务名称或说明':'Search service name or description','正在读取 systemd 服务…':'Loading systemd services…','已监控服务':'Monitored services','“暂停监控”只停止状态检查，不影响服务运行；“停止服务”才会操作 systemd。':'“Pause monitor” stops only status checks; “Stop service” operates systemd.','新建服务监控':'Add service monitor','编辑服务监控':'Edit service monitor','OLED 显示名称':'OLED display name','systemd 服务名称':'systemd service name','备注说明':'Description','保存监控':'Save monitor','清空':'Clear','未监控':'Not monitored','已监控':'Monitored','已暂停':'Paused','加入监控':'Add monitor','编辑监控':'Edit monitor','暂停监控':'Pause monitor','恢复监控':'Resume monitor','停止服务':'Stop service','启动服务':'Start service','编辑':'Edit','删除监控':'Delete monitor','正在运行':'Running','未运行':'Stopped','监控已暂停':'Monitor paused','运行中':'Running','服务已停止':'Service stopped','备注：':'Note: ','未填写':'Not provided','暂无服务说明':'No service description','没有匹配的服务':'No matching services','尚未监控任何服务':'No monitored services','正在保存…':'Saving…','保存成功':'Saved','暂无配置项':'No settings','暂无数据':'No data',
+'程序启动':'Agent started','程序停止':'Agent stopped','告警出现':'Alert active','告警恢复':'Alert recovered','显示对象切换':'Display owner changed','互联网断开':'Internet down','互联网恢复':'Internet recovered','网络接口切换':'Network interface changed','RGB 控制错误':'RGB control error','RGB 模式切换':'RGB mode changed','RGB 控制恢复':'RGB control recovered','系统事件':'System event','监控对象停止':'Monitored target down','监控对象恢复':'Monitored target recovered','网络断开':'Network down','网络恢复':'Network recovered','供电欠压':'Power undervoltage','供电恢复':'Power recovered','历史电源状态':'Power history flag','根文件系统只读':'Root filesystem read-only',
+'正常主页':'Normal home','处理器温度严重':'Critical CPU temperature','处理器降频':'CPU throttled','频率受限':'Frequency capped','服务停止':'Service down','进程停止':'Process down','磁盘严重不足':'Disk critically full','处理器温度偏高':'High CPU temperature','处理器负载过高':'High CPU load','内存占用过高':'High memory usage','磁盘空间不足':'Disk usage high','Wi-Fi 信号弱':'Weak Wi-Fi signal','全灭':'Off','普通告警':'Warning','严重告警':'Critical','紧急告警':'Emergency','无线网络':'Wi-Fi','有线网络':'Ethernet','正常':'Normal','停止':'Stopped','系统服务':'System service','普通进程':'Process','当前没有告警':'No active alerts','没有符合条件的日志':'No matching events','数据来源：systemd journal':'Source: systemd journal','项尚未保存':'unsaved changes','没有需要保存的修改':'No changes to save','正在保存并应用…':'Saving and applying…'
+};
+Object.assign(EN,{
+'正常状态灯效':'Normal mode','自定义颜色常亮':'Custom solid color','自定义颜色闪烁':'Custom color flash','流水灯':'Flow','呼吸灯':'Breathe','跑马灯':'Marquee','彩虹灯':'Rainbow','炫彩灯':'Colorful','内置效果速度':'Built-in effect speed','内置效果颜色':'Built-in effect color','慢速':'Slow','中速':'Medium','快速':'Fast','红色':'Red','绿色':'Green','蓝色':'Blue','黄色':'Yellow','紫色':'Purple','青色':'Cyan','白色':'White','关闭':'Off','不干预':'Unmanaged',
+'普通告警亮灯':'Warning on time','普通告警灭灯':'Warning off time','严重告警亮灯':'Critical on time','严重告警灭灯':'Critical off time','紧急告警亮灯':'Emergency on time','紧急告警灭灯':'Emergency off time','RGB 寄存器写入间隔':'RGB register write interval','处理器高负载阈值':'High CPU threshold','处理器恢复阈值':'CPU recovery threshold','处理器持续时间':'CPU duration','内存高占用阈值':'High memory threshold','内存恢复阈值':'Memory recovery threshold','内存持续时间':'Memory duration','高温告警阈值':'High temperature threshold','严重高温阈值':'Critical temperature threshold','磁盘高占用阈值':'High disk threshold','磁盘严重阈值':'Critical disk threshold','Wi-Fi 弱信号阈值':'Weak Wi-Fi threshold','Wi-Fi 恢复阈值':'Wi-Fi recovery threshold','弱信号持续时间':'Weak signal duration',
+'风扇启动温度':'Fan start temperature','二档起始温度':'Level 2 temperature','三档起始温度':'Level 3 temperature','四档起始温度':'Level 4 temperature','全速起始温度':'Full-speed temperature','降档温度回差':'Downshift hysteresis','传感器采样周期':'Sensor interval','OLED 刷新周期':'OLED refresh interval','OLED 页面轮播周期':'OLED page interval','网络检查周期':'Network check interval','服务检查周期':'Service check interval','健康检查周期':'Health check interval','第一行纵坐标':'Row 1 Y position','第二行纵坐标':'Row 2 Y position','第三行纵坐标':'Row 3 Y position','第四行纵坐标':'Row 4 Y position','树莓派电源灯':'Raspberry Pi power LED','树莓派活动灯':'Raspberry Pi activity LED','监听地址':'Bind address','监听端口':'Listen port','默认日志条数':'Default log entries',
+'处理器、温度与散热':'CPU, temperature and cooling','供电与欠压':'Power and undervoltage','内存':'Memory','存储':'Storage','网络与 Wi-Fi':'Network and Wi-Fi','服务与进程':'Services and processes','仅在没有当前告警时生效；告警会立即抢占。':'Only active when there are no alerts; alerts take priority immediately.','MCU 内置速度档位。':'MCU built-in speed level.','仅流水灯和呼吸灯使用。':'Used only by flow and breathe modes.','硬件校准项，通常保持 10 毫秒。':'Hardware calibration setting; normally keep 10 ms.','单位 dBm，数值越接近 0 信号越强。':'Unit: dBm. Values closer to 0 mean a stronger signal.','单位 dBm，应高于弱信号阈值。':'Unit: dBm. Must be above the weak-signal threshold.','避免临界温度附近频繁切换档位。':'Prevents rapid level changes near a threshold.','选择“关闭”时由程序熄灭板载灯。':'Choose “Off” to let the program turn off the board LED.'
+});
+Object.assign(EN,{'机器标识':'Host ID','机器':'Host','全部机器':'All hosts','配置机器':'Configure host','多机配置同步':'Multi-host configuration sync','勾选目标机器后，将当前页面中已修改的配置项批量同步到这些机器。':'Select target hosts to copy the changed settings on this page.','当前机器配置令牌（Bearer Token）':'Current host Bearer Token','保存到当前机器':'Save to current host','批量同步已修改项':'Sync changed settings','设备标识':'Device identity','自定义本机显示名称和稳定标识':'Set the local display name and stable identifier','显示名称':'Display name','机器列表':'Host list','登记需要聚合监控的其他节点':'Register nodes for fleet monitoring','已登记机器':'Registered hosts','尚未登记其他机器':'No remote hosts registered','添加或更新机器':'Add or update host','节点地址':'Node URL','保存机器':'Save host','正在读取主机状态…':'Loading host status…','可用':'Available','剩余':'Free','本机':'Local','连接失败':'Connection failed'});
+Object.assign(EN,{'端口':'port','0.0.0.0 允许局域网访问；127.0.0.1 仅本机。':'0.0.0.0 allows LAN access; 127.0.0.1 is local only.','范围 1–65535；保存后 API 自动重启。':'Range: 1–65535. The API restarts after saving.','API 服务不能停止自身':'The API service cannot stop itself','已自动填写，可继续修改。':'Filled automatically; you can continue editing.','请先选择同步目标机器':'Select target hosts first'});
+const ZH=Object.fromEntries(Object.entries(EN).map(([zh,en])=>[en,zh])),tr=s=>LANG==='en'?(EN[s]||s):(ZH[s]||s);
+function translateNode(root=document){const map=LANG==='en'?EN:ZH,translate=value=>{const trim=value.trim();return trim&&map[trim]?value.replace(trim,map[trim]):value};const walker=document.createTreeWalker(root,NodeFilter.SHOW_TEXT);let n;while(n=walker.nextNode())n.nodeValue=translate(n.nodeValue);root.querySelectorAll?.('[placeholder],[title]').forEach(e=>['placeholder','title'].forEach(a=>{const v=e.getAttribute(a);if(v)e.setAttribute(a,translate(v))}))}
+function applyTheme(value){const resolved=value==='auto'?(matchMedia('(prefers-color-scheme: dark)').matches?'dark':'light'):value;document.documentElement.dataset.theme=resolved}
+const $=id=>document.getElementById(id),tabs=[...document.querySelectorAll('nav button')];let original={},fleetHosts=[],currentConfigHost='';const esc=s=>String(s??'').replace(/[&<>"']/g,c=>({'&':'&amp;','<':'&lt;','>':'&gt;','"':'&quot;',"'":'&#39;'}[c]));
+const sectionMeta={device:['设备标识','自定义本机显示名称和稳定标识'],hosts:['机器列表','登记需要聚合监控的其他节点'],led:['灯光设置','正常灯效与告警颜色'],alerts:['告警阈值','处理器、内存、温度、磁盘和 Wi-Fi'],fan:['风扇温控','温度档位与降档回差'],timing:['刷新周期','传感器、屏幕、网络和健康检查'],display:['屏幕布局','OLED 四行文字位置'],dark_mode:['板载指示灯','树莓派电源灯与活动灯'],services:['服务监控','监控 systemd 服务'],processes:['进程监控','监控普通进程关键字'],api:['Web 与 API','监听地址、端口和日志数量']};
+const labels={'led.normal_mode':'正常状态灯效','led.normal_r':'红色通道','led.normal_g':'绿色通道','led.normal_b':'蓝色通道','led.normal_flash_on_ms':'亮灯时间','led.normal_flash_off_ms':'灭灯时间','led.normal_effect_speed':'内置效果速度','led.normal_effect_color':'内置效果颜色','led.warning_flash_on_ms':'普通告警亮灯','led.warning_flash_off_ms':'普通告警灭灯','led.critical_flash_on_ms':'严重告警亮灯','led.critical_flash_off_ms':'严重告警灭灯','led.emergency_flash_on_ms':'紧急告警亮灯','led.emergency_flash_off_ms':'紧急告警灭灯','led.write_delay_ms':'RGB 寄存器写入间隔','alerts.cpu_high':'处理器高负载阈值','alerts.cpu_recover':'处理器恢复阈值','alerts.cpu_high_seconds':'处理器持续时间','alerts.memory_high':'内存高占用阈值','alerts.memory_recover':'内存恢复阈值','alerts.memory_high_seconds':'内存持续时间','alerts.temp_high':'高温告警阈值','alerts.temp_critical':'严重高温阈值','alerts.disk_high':'磁盘高占用阈值','alerts.disk_critical':'磁盘严重阈值','alerts.wifi_weak':'Wi-Fi 弱信号阈值','alerts.wifi_recover':'Wi-Fi 恢复阈值','alerts.wifi_weak_seconds':'弱信号持续时间','fan.start':'风扇启动温度','fan.level2':'二档起始温度','fan.level3':'三档起始温度','fan.level4':'四档起始温度','fan.max':'全速起始温度','fan.hysteresis':'降档温度回差','timing.sensor_interval':'传感器采样周期','timing.oled_refresh_interval':'OLED 刷新周期','timing.page_interval':'OLED 页面轮播周期','timing.network_interval':'网络检查周期','timing.service_interval':'服务检查周期','timing.health_interval':'健康检查周期','display.row1_y':'第一行纵坐标','display.row2_y':'第二行纵坐标','display.row3_y':'第三行纵坐标','display.row4_y':'第四行纵坐标','dark_mode.pi_pwr_led':'树莓派电源灯','dark_mode.pi_act_led':'树莓派活动灯','api.bind':'监听地址','api.port':'监听端口','api.log_limit':'默认日志条数','device.identifier':'机器标识','device.name':'显示名称'};
 ['cpu','power','memory','storage','network','service'].forEach(g=>['r','g','b'].forEach(c=>labels[`led.${g}_${c}`]=`${({r:'红',g:'绿',b:'蓝'})[c]}色通道`));
-const hints={'led.normal_mode':'仅在没有当前告警时生效；告警会立即抢占。','led.normal_r':'范围 0–255。','led.normal_g':'范围 0–255。','led.normal_b':'范围 0–255。','led.normal_flash_on_ms':'范围 50–60000 毫秒。','led.normal_flash_off_ms':'范围 50–60000 毫秒。','led.normal_effect_speed':'MCU 内置速度档位。','led.normal_effect_color':'仅流水灯和呼吸灯使用。','led.write_delay_ms':'硬件校准项，通常保持 10 毫秒。','alerts.wifi_weak':'单位 dBm，数值越接近 0 信号越强。','alerts.wifi_recover':'单位 dBm，应高于弱信号阈值。','fan.hysteresis':'避免临界温度附近频繁切换档位。','api.bind':'0.0.0.0 允许局域网访问；127.0.0.1 仅本机。','api.port':'范围 1–65535；保存后 API 自动重启。','dark_mode.pi_pwr_led':'选择“关闭”时由 PIGWay 熄灭板载灯。','dark_mode.pi_act_led':'选择“关闭”时由 PIGWay 熄灭板载灯。'};
+const hints={'led.normal_mode':'仅在没有当前告警时生效；告警会立即抢占。','led.normal_r':'范围 0–255。','led.normal_g':'范围 0–255。','led.normal_b':'范围 0–255。','led.normal_flash_on_ms':'范围 50–60000 毫秒。','led.normal_flash_off_ms':'范围 50–60000 毫秒。','led.normal_effect_speed':'MCU 内置速度档位。','led.normal_effect_color':'仅流水灯和呼吸灯使用。','led.write_delay_ms':'硬件校准项，通常保持 10 毫秒。','alerts.wifi_weak':'单位 dBm，数值越接近 0 信号越强。','alerts.wifi_recover':'单位 dBm，应高于弱信号阈值。','fan.hysteresis':'避免临界温度附近频繁切换档位。','api.bind':'0.0.0.0 允许局域网访问；127.0.0.1 仅本机。','api.port':'范围 1–65535；保存后 API 自动重启。','dark_mode.pi_pwr_led':'选择“关闭”时由程序熄灭板载灯。','dark_mode.pi_act_led':'选择“关闭”时由程序熄灭板载灯。'};
 ['normal','cpu','power','memory','storage','network','service'].forEach(g=>['r','g','b'].forEach(c=>hints[`led.${g}_${c}`]='范围 0–255。'));
 const options={'led.normal_mode':[['off','全灭'],['solid','自定义颜色常亮'],['flash','自定义颜色闪烁'],['flow','流水灯'],['breathe','呼吸灯'],['marquee','跑马灯'],['rainbow','彩虹灯'],['colorful','炫彩灯']],'led.normal_effect_speed':[['1','慢速'],['2','中速'],['3','快速']],'led.normal_effect_color':[['red','红色'],['green','绿色'],['blue','蓝色'],['yellow','黄色'],['purple','紫色'],['cyan','青色'],['white','白色']],'dark_mode.pi_pwr_led':[['off','关闭'],['on','不干预']],'dark_mode.pi_act_led':[['off','关闭'],['on','不干预']]};
 const numberRules={'led.normal_r':[0,255,1],'led.normal_g':[0,255,1],'led.normal_b':[0,255,1],'led.normal_flash_on_ms':[50,60000,10],'led.normal_flash_off_ms':[50,60000,10],'led.warning_flash_on_ms':[50,60000,10],'led.warning_flash_off_ms':[50,60000,10],'led.critical_flash_on_ms':[50,60000,10],'led.critical_flash_off_ms':[50,60000,10],'led.emergency_flash_on_ms':[50,60000,10],'led.emergency_flash_off_ms':[50,60000,10],'led.write_delay_ms':[1,1000,1],'alerts.cpu_high':[0,100,1],'alerts.cpu_recover':[0,100,1],'alerts.cpu_high_seconds':[1,86400,1],'alerts.memory_high':[0,100,1],'alerts.memory_recover':[0,100,1],'alerts.memory_high_seconds':[1,86400,1],'alerts.temp_high':[0,120,.1],'alerts.temp_critical':[0,120,.1],'alerts.disk_high':[0,100,1],'alerts.disk_critical':[0,100,1],'alerts.wifi_weak':[-120,0,1],'alerts.wifi_recover':[-120,0,1],'alerts.wifi_weak_seconds':[1,86400,1],'fan.start':[0,100,.1],'fan.level2':[0,100,.1],'fan.level3':[0,100,.1],'fan.level4':[0,100,.1],'fan.max':[0,100,.1],'fan.hysteresis':[0,20,.1],'timing.sensor_interval':[.2,3600,.1],'timing.oled_refresh_interval':[.2,3600,.1],'timing.page_interval':[1,3600,.1],'timing.network_interval':[1,3600,.1],'timing.service_interval':[1,3600,.1],'timing.health_interval':[.2,3600,.1],'display.row1_y':[0,31,1],'display.row2_y':[0,31,1],'display.row3_y':[0,31,1],'display.row4_y':[0,31,1],'api.port':[1,65535,1],'api.log_limit':[1,1000,1]};['cpu','power','memory','storage','network','service'].forEach(g=>['r','g','b'].forEach(c=>numberRules[`led.${g}_${c}`]=[0,255,1]));
 const units={'led.normal_flash_on_ms':'毫秒','led.normal_flash_off_ms':'毫秒','led.warning_flash_on_ms':'毫秒','led.warning_flash_off_ms':'毫秒','led.critical_flash_on_ms':'毫秒','led.critical_flash_off_ms':'毫秒','led.emergency_flash_on_ms':'毫秒','led.emergency_flash_off_ms':'毫秒','led.write_delay_ms':'毫秒','alerts.cpu_high':'%','alerts.cpu_recover':'%','alerts.cpu_high_seconds':'秒','alerts.memory_high':'%','alerts.memory_recover':'%','alerts.memory_high_seconds':'秒','alerts.temp_high':'°C','alerts.temp_critical':'°C','alerts.disk_high':'%','alerts.disk_critical':'%','alerts.wifi_weak':'dBm','alerts.wifi_recover':'dBm','alerts.wifi_weak_seconds':'秒','fan.start':'°C','fan.level2':'°C','fan.level3':'°C','fan.level4':'°C','fan.max':'°C','fan.hysteresis':'°C','timing.sensor_interval':'秒','timing.oled_refresh_interval':'秒','timing.page_interval':'秒','timing.network_interval':'秒','timing.service_interval':'秒','timing.health_interval':'秒','display.row1_y':'像素','display.row2_y':'像素','display.row3_y':'像素','display.row4_y':'像素','api.port':'端口','api.log_limit':'条'};
-const sectionOrder=['led','alerts','fan','timing','display','dark_mode','services','processes','api'],alertColorGroups=[['cpu','处理器、温度与散热'],['power','供电与欠压'],['memory','内存'],['storage','存储'],['network','网络与 Wi-Fi'],['service','服务与进程']];
-const ownerNames={NORMAL_HOME:'正常主页',ROOT_READONLY:'根文件系统只读',TEMP_CRITICAL:'处理器温度严重',POWER_UNDERVOLT:'供电欠压',THROTTLED:'处理器降频',FREQ_CAPPED:'频率受限',NETWORK_DOWN:'网络断开',INTERNET_DOWN:'互联网断开',SERVICE_DOWN:'服务停止',PROCESS_DOWN:'进程停止',DISK_CRITICAL:'磁盘严重不足',TEMP_HIGH:'处理器温度偏高',CPU_HIGH:'处理器负载过高',MEMORY_HIGH:'内存占用过高',DISK_HIGH:'磁盘空间不足',WIFI_WEAK:'Wi-Fi 信号弱'},rgbNames={OFF:'全灭',NORMAL_SOLID:'正常 · 自定义常亮',NORMAL_FLASH:'正常 · 自定义闪烁',NORMAL_FLOW:'正常 · 流水灯',NORMAL_BREATHE:'正常 · 呼吸灯',NORMAL_MARQUEE:'正常 · 跑马灯',NORMAL_RAINBOW:'正常 · 彩虹灯',NORMAL_COLORFUL:'正常 · 炫彩灯'},eventNames={START:'程序启动',STOP:'程序停止',ALERT_ACTIVE:'告警出现',ALERT_RECOVERED:'告警恢复',DISPLAY_OWNER:'显示对象切换',RGB_MODE:'RGB 模式切换',INTERNET_DOWN:'互联网断开',INTERNET_RECOVERED:'互联网恢复',NETWORK_DOWN:'网络断开',NETWORK_RECOVERED:'网络恢复',POWER_LOW:'供电欠压',POWER_RECOVERED:'供电恢复'};
-function ownerName(id){const [type,suffix]=String(id||'').split('|',2);return(ownerNames[type]||type)+(suffix?` · ${suffix}`:'')}function rgbName(mode){if(rgbNames[mode])return rgbNames[mode];const p=String(mode||'').split('_'),groups={CPU:'处理器',POWER:'供电',MEMORY:'内存',STORAGE:'存储',NETWORK:'网络',SERVICE:'服务'},levels={WARNING:'普通告警',CRITICAL:'严重告警',EMERGENCY:'紧急告警'};return`${groups[p[0]]||p[0]} · ${levels[p[1]]||p[1]}闪烁`}
-function field(section,key,value,extra=''){const id=`${section}.${key}`,opts=options[id],rule=numberRules[id],label=labels[id]||key,help=hints[id]||'',unit=units[id]||'';let control;if(opts)control=`<select data-section="${esc(section)}" data-key="${esc(key)}">${opts.map(([v,l])=>`<option value="${v}" ${String(value)===v?'selected':''}>${l}</option>`).join('')}</select>`;else{const input=`<input ${rule?'type="number"':''} ${rule?`min="${rule[0]}" max="${rule[1]}" step="${rule[2]}"`:''} data-section="${esc(section)}" data-key="${esc(key)}" value="${esc(value)}">`;control=unit?`<div class="input-unit">${input}<span class="unit">${unit}</span></div>`:input}return`<div class="field ${extra}"><label>${esc(label)}${control}</label>${help?`<div class="hint">${esc(help)}</div>`:''}</div>`}
-function rgbGroup(values,prefix,title){const r=Number(values[`${prefix}_r`]||0),g=Number(values[`${prefix}_g`]||0),b=Number(values[`${prefix}_b`]||0),hex='#'+[r,g,b].map(x=>Math.max(0,Math.min(255,x)).toString(16).padStart(2,'0')).join('');return`<div class="group"><div class="group-head"><h3>${title}</h3><span class="muted">点击色块打开色盘</span></div><div class="rgb-row"><div class="color-field"><label>颜色</label><div class="swatch-wrap"><span class="swatch" data-swatch="${prefix}" style="background:${hex}"></span><input class="color-picker" type="color" data-color-prefix="${prefix}" value="${hex}" title="选择${esc(title)}"></div></div>${['r','g','b'].map(c=>field('led',`${prefix}_${c}`,values[`${prefix}_${c}`])).join('')}</div></div>`}
+const sectionOrder=['device','hosts','led','alerts','fan','timing','display','dark_mode','services','processes','api'],alertColorGroups=[['cpu','处理器、温度与散热'],['power','供电与欠压'],['memory','内存'],['storage','存储'],['network','网络与 Wi-Fi'],['service','服务与进程']];
+const ownerNames={NORMAL_HOME:'正常主页',ROOT_READONLY:'根文件系统只读',TEMP_CRITICAL:'处理器温度严重',POWER_UNDERVOLT:'供电欠压',THROTTLED:'处理器降频',FREQ_CAPPED:'频率受限',NETWORK_DOWN:'网络断开',INTERNET_DOWN:'互联网断开',SERVICE_DOWN:'服务停止',PROCESS_DOWN:'进程停止',DISK_CRITICAL:'磁盘严重不足',TEMP_HIGH:'处理器温度偏高',CPU_HIGH:'处理器负载过高',MEMORY_HIGH:'内存占用过高',DISK_HIGH:'磁盘空间不足',WIFI_WEAK:'Wi-Fi 信号弱'},rgbNames={OFF:'全灭',NORMAL_SOLID:'正常 · 自定义常亮',NORMAL_FLASH:'正常 · 自定义闪烁',NORMAL_FLOW:'正常 · 流水灯',NORMAL_BREATHE:'正常 · 呼吸灯',NORMAL_MARQUEE:'正常 · 跑马灯',NORMAL_RAINBOW:'正常 · 彩虹灯',NORMAL_COLORFUL:'正常 · 炫彩灯'},eventNames={START:'程序启动',STOP:'程序停止',ALERT_ACTIVE:'告警出现',ALERT_RECOVERED:'告警恢复',DISPLAY_OWNER:'显示对象切换',INTERNET_DOWN:'互联网断开',INTERNET_RECOVERED:'互联网恢复',NET_SWITCH:'网络接口切换',NETWORK_DOWN:'网络断开',NETWORK_RECOVERED:'网络恢复',POWER_LOW:'供电欠压',POWER_RECOVERED:'供电恢复',POWER_HISTORY:'历史电源状态',HISTORY_FLAG:'历史电源状态',ROOT_READONLY:'根文件系统只读',RGB_ERROR:'RGB 控制错误',RGB_MODE:'RGB 模式切换',RGB_RECOVERED:'RGB 控制恢复',SYSTEM:'系统事件',WATCH_DOWN:'监控对象停止',WATCH_RECOVERED:'监控对象恢复'};
+function ownerName(id){const [type,suffix]=String(id||'').split('|',2),name=ownerNames[type]||type;return tr(name)+(suffix?` · ${suffix}`:'')}function rgbName(mode){if(rgbNames[mode])return tr(rgbNames[mode]);const p=String(mode||'').split('_'),groups={CPU:'处理器',POWER:'供电',MEMORY:'内存',STORAGE:'存储',NETWORK:'网络',SERVICE:'服务'},levels={WARNING:'普通告警',CRITICAL:'严重告警',EMERGENCY:'紧急告警'};return`${tr(groups[p[0]]||p[0])} · ${tr(levels[p[1]]||p[1])}${LANG==='zh'?'闪烁':' flash'}`}function eventName(id){return tr(eventNames[id]||(LANG==='zh'?`未知事件（${id}）`:String(id).toLowerCase().replaceAll('_',' ')))}
+function field(section,key,value,extra=''){const id=`${section}.${key}`,opts=options[id],rule=numberRules[id],label=tr(labels[id]||key),help=tr(hints[id]||''),unit=tr(units[id]||'');let control;if(opts)control=`<select data-section="${esc(section)}" data-key="${esc(key)}">${opts.map(([v,l])=>`<option value="${v}" ${String(value)===v?'selected':''}>${tr(l)}</option>`).join('')}</select>`;else{const input=`<input ${rule?'type="number"':''} ${rule?`min="${rule[0]}" max="${rule[1]}" step="${rule[2]}"`:''} data-section="${esc(section)}" data-key="${esc(key)}" value="${esc(value)}">`;control=unit?`<div class="input-unit">${input}<span class="unit">${unit}</span></div>`:input}return`<div class="field ${extra}"><label>${esc(label)}${control}</label>${help?`<div class="hint">${esc(help)}</div>`:''}</div>`}
+function rgbGroup(values,prefix,title){const r=Number(values[`${prefix}_r`]||0),g=Number(values[`${prefix}_g`]||0),b=Number(values[`${prefix}_b`]||0),hex='#'+[r,g,b].map(x=>Math.max(0,Math.min(255,x)).toString(16).padStart(2,'0')).join('');return`<div class="group"><div class="group-head"><h3>${tr(title)}</h3><span class="muted">${tr('点击色块打开色盘')}</span></div><div class="rgb-row"><div class="color-field"><label>${tr('颜色')}</label><div class="swatch-wrap"><span class="swatch" data-swatch="${prefix}" style="background:${hex}"></span><input class="color-picker" type="color" data-color-prefix="${prefix}" value="${hex}" title="${LANG==='zh'?'选择':'Choose ' }${esc(tr(title))}"></div></div>${['r','g','b'].map(c=>field('led',`${prefix}_${c}`,values[`${prefix}_${c}`])).join('')}</div></div>`}
 function normalGroup(v){return`<div class="group"><div class="group-head"><div><h3>正常运行灯效</h3><div class="hint">没有告警时显示；告警出现后自动让位。</div></div></div><div class="fields">${field('led','normal_mode',v.normal_mode,'span2')}<div class="normal-field span2" data-modes="solid flash">${rgbGroup(v,'normal','自定义颜色')}</div><div class="normal-field" data-modes="flash">${field('led','normal_flash_on_ms',v.normal_flash_on_ms)}</div><div class="normal-field" data-modes="flash">${field('led','normal_flash_off_ms',v.normal_flash_off_ms)}</div><div class="normal-field" data-modes="flow breathe marquee rainbow colorful">${field('led','normal_effect_speed',v.normal_effect_speed)}</div><div class="normal-field" data-modes="flow breathe">${field('led','normal_effect_color',v.normal_effect_color)}</div></div></div>`}
-function renderLed(v){const flash=['warning','critical','emergency'].map((x,i)=>`<div class="group"><h3>${['普通告警','严重告警','紧急告警'][i]}闪烁节奏</h3><div class="fields">${field('led',`${x}_flash_on_ms`,v[`${x}_flash_on_ms`])}${field('led',`${x}_flash_off_ms`,v[`${x}_flash_off_ms`])}</div></div>`).join(''),advanced=v.write_delay_ms===undefined?'':`<div class="group"><h3>硬件高级参数</h3><div class="fields">${field('led','write_delay_ms',v.write_delay_ms)}</div></div>`;return normalGroup(v)+`<div class="group"><div class="group-head"><div><h3>告警对象颜色</h3><div class="hint">告警对象决定颜色，严重程度决定闪烁速度。</div></div></div>${alertColorGroups.map(([p,t])=>rgbGroup(v,p,t)).join('')}</div>`+flash+advanced}
-function renderGeneral(s,v){const [t,d]=sectionMeta[s]||[s,''];return`<div class="group"><div class="group-head"><div><h3>${t}</h3><div class="hint">${d}</div></div></div><div class="fields">${Object.entries(v).map(([k,x])=>field(s,k,x)).join('')||'<div class="muted">暂无配置项</div>'}</div></div>`}
-function renderServices(){return`<div class="group"><div class="group-head"><div><h3>当前系统服务</h3><div class="hint">点击“加入监控”会自动填写下方表单；也可以手动输入尚未安装的未来服务。</div></div><button id="refreshServices">刷新列表</button></div><input class="service-search" id="serviceSearch" placeholder="搜索服务名称或说明"><div class="service-list rows" id="systemServices"><div class="muted">正在读取 systemd 服务…</div></div></div><div class="group"><h3>已监控服务</h3><div class="hint">“暂停监控”只停止 PIGWay 检查，不影响服务运行；“停止服务”才会操作 systemd。</div><div class="rows" id="monitoredServices"></div></div><div class="group"><h3 id="serviceFormTitle">新建服务监控</h3><div class="service-form"><label>OLED 显示名称<input id="monitorName" maxlength="64" placeholder="例如：DOCKER"></label><label>systemd 服务名称<input id="monitorTarget" maxlength="128" placeholder="例如：docker.service"></label><label class="full">备注说明<input id="monitorNote" maxlength="120" placeholder="例如：家庭相册容器服务"></label><div class="full"><button id="saveMonitor">保存监控</button> <button id="resetMonitor">清空</button> <span id="serviceMessage" class="muted"></span></div></div></div>`}
+function renderLed(v){const flash=['warning','critical','emergency'].map((x,i)=>`<div class="group"><h3>${tr(['普通告警闪烁节奏','严重告警闪烁节奏','紧急告警闪烁节奏'][i])}</h3><div class="fields">${field('led',`${x}_flash_on_ms`,v[`${x}_flash_on_ms`])}${field('led',`${x}_flash_off_ms`,v[`${x}_flash_off_ms`])}</div></div>`).join(''),advanced=v.write_delay_ms===undefined?'':`<div class="group"><h3>硬件高级参数</h3><div class="fields">${field('led','write_delay_ms',v.write_delay_ms)}</div></div>`;return normalGroup(v)+`<div class="group"><div class="group-head"><div><h3>告警对象颜色</h3><div class="hint">告警对象决定颜色，严重程度决定闪烁速度。</div></div></div>${alertColorGroups.map(([p,t])=>rgbGroup(v,p,tr(t))).join('')}</div>`+flash+advanced}
+function renderGeneral(s,v){const [t,d]=sectionMeta[s]||[s,''];return`<div class="group"><div class="group-head"><div><h3>${tr(t)}</h3><div class="hint">${tr(d)}</div></div></div><div class="fields">${Object.entries(v).map(([k,x])=>field(s,k,x)).join('')||'<div class="muted">暂无配置项</div>'}</div></div>`}
+function renderServices(){return`<div class="group"><div class="group-head"><div><h3>当前系统服务</h3><div class="hint">点击“加入监控”会自动填写下方表单；也可以手动输入尚未安装的未来服务。</div></div><button id="refreshServices">刷新列表</button></div><input class="service-search" id="serviceSearch" placeholder="搜索服务名称或说明"><div class="service-list rows" id="systemServices"><div class="muted">正在读取 systemd 服务…</div></div></div><div class="group"><h3>已监控服务</h3><div class="hint">“暂停监控”只停止状态检查，不影响服务运行；“停止服务”才会操作 systemd。</div><div class="rows" id="monitoredServices"></div></div><div class="group"><h3 id="serviceFormTitle">新建服务监控</h3><div class="service-form"><label>OLED 显示名称<input id="monitorName" maxlength="64" placeholder="例如：DOCKER"></label><label>systemd 服务名称<input id="monitorTarget" maxlength="128" placeholder="例如：docker.service"></label><label class="full">备注说明<input id="monitorNote" maxlength="120" placeholder="例如：家庭相册容器服务"></label><div class="full"><button id="saveMonitor">保存监控</button> <button id="resetMonitor">清空</button> <span id="serviceMessage" class="muted"></span></div></div></div>`}
+function renderHosts(v){const entries=Object.entries(v||{});return`<div class="group"><h3>已登记机器</h3><div class="rows">${entries.map(([id,url])=>`<div class="row"><span><b>${esc(id)}</b><br><span class="muted">${esc(url)}</span></span><button class="danger" data-delete-host="${esc(id)}">删除</button></div>`).join('')||'<div class="muted">尚未登记其他机器</div>'}</div></div><div class="group"><h3>添加或更新机器</h3><div class="service-form"><label>机器标识<input id="hostId" maxlength="64" placeholder="例如：living-room"></label><label>节点地址<input id="hostUrl" maxlength="200" placeholder="例如：http://192.168.1.20:6001"></label><div class="full"><button id="saveHost">保存机器</button> <span id="hostMessage" class="muted"></span></div></div></div>`}
 function updateConditional(){const mode=document.querySelector('[data-section="led"][data-key="normal_mode"]')?.value||'off';document.querySelectorAll('.normal-field').forEach(x=>x.classList.toggle('hidden',!x.dataset.modes.split(' ').includes(mode)));updateSwatches()}function updateSwatches(){document.querySelectorAll('[data-swatch]').forEach(s=>{const p=s.dataset.swatch,read=c=>Math.max(0,Math.min(255,Number(document.querySelector(`[data-section="led"][data-key="${p}_${c}"]`)?.value||0))),hex='#'+['r','g','b'].map(c=>Math.round(read(c)).toString(16).padStart(2,'0')).join('');s.style.background=hex;const picker=document.querySelector(`[data-color-prefix="${p}"]`);if(picker)picker.value=hex})}
-function renderConfig(){const ss=sectionOrder.filter(s=>original[s]);$('configMenu').innerHTML=ss.map((s,i)=>`<button class="${i===0?'active':''}" data-config-section="${s}">${sectionMeta[s]?.[0]||s}</button>`).join('');$('configRows').innerHTML=ss.map((s,i)=>`<section class="config-page ${i===0?'active':''}" data-config-page="${s}"><h2>${sectionMeta[s]?.[0]||s}</h2><p class="muted">${sectionMeta[s]?.[1]||''}</p>${s==='led'?renderLed(original[s]):s==='services'?renderServices():renderGeneral(s,original[s])}</section>`).join('');$('configMenu').onclick=e=>{const b=e.target.closest('button');if(!b)return;document.querySelectorAll('[data-config-section]').forEach(x=>x.classList.toggle('active',x===b));document.querySelectorAll('[data-config-page]').forEach(x=>x.classList.toggle('active',x.dataset.configPage===b.dataset.configSection));if(b.dataset.configSection==='services')loadServices()};$('configRows').oninput=e=>{if(e.target.matches('[data-color-prefix]')){const p=e.target.dataset.colorPrefix,v=e.target.value;['r','g','b'].forEach((c,i)=>{document.querySelector(`[data-section="led"][data-key="${p}_${c}"]`).value=parseInt(v.slice(1+i*2,3+i*2),16)})}if(e.target.matches('[data-section="led"],[data-color-prefix]'))updateConditional();if(e.target.matches('[data-section]'))markChanged()};$('refreshServices')?.addEventListener('click',loadServices);$('serviceSearch')?.addEventListener('input',renderServiceLists);$('saveMonitor')?.addEventListener('click',saveMonitor);$('resetMonitor')?.addEventListener('click',resetMonitorForm);updateConditional()}
-function markChanged(){let n=0;document.querySelectorAll('#configRows [data-section]').forEach(i=>{if(i.value!==original[i.dataset.section][i.dataset.key])n++});$('saveState').textContent=n?`有 ${n} 项尚未保存`:'尚未修改';$('saveState').className=n?'':'muted'}
-tabs.forEach(b=>b.onclick=()=>{tabs.forEach(x=>x.classList.toggle('active',x===b));['overview','logs','config'].forEach(id=>$(id).classList.toggle('hidden',id!==b.dataset.tab));if(b.dataset.tab==='logs')loadLogs();if(b.dataset.tab==='config')loadConfig()});async function get(url,opt){const r=await fetch(url,opt),text=await r.text();let j;try{j=JSON.parse(text)}catch{throw Error(`服务器返回异常 (${r.status})`)}if(!r.ok)throw Error(j.error||`请求失败 (${r.status})`);return j}function rows(target,items,empty='暂无数据'){$(target).innerHTML=items.length?items.join(''):`<div class="muted">${empty}</div>`}
-let serviceCache=[],editingServiceName='';function tokenHeaders(){const token=$('token').value.trim();localStorage.setItem('pigwayToken',token);return{'Content-Type':'application/json','Authorization':`Bearer ${token}`}}
-async function loadServices(){if(!$('systemServices'))return;try{const d=await get('/api/v1/services');serviceCache=d.services;renderServiceLists()}catch(e){$('systemServices').innerHTML=`<div class="error">${esc(e.message)}</div>`}}
-function renderServiceLists(){if(!$('systemServices'))return;const q=$('serviceSearch').value.trim().toLowerCase(),filtered=serviceCache.filter(s=>!q||`${s.unit} ${s.description} ${s.note}`.toLowerCase().includes(q));rows('systemServices',filtered.map(s=>`<div class="row"><span><b>${esc(s.unit)}</b><br><span class="muted">${esc(s.description||'暂无服务说明')} · ${esc(s.active==='active'?'正在运行':'未运行')}</span></span><span class="row-actions"><span class="badge ${s.monitored&&!s.paused?'good':''}">${s.monitored?(s.paused?'已暂停':'已监控'):'未监控'}</span><button data-select-service="${esc(s.unit)}">${s.monitored?'编辑监控':'加入监控'}</button></span></div>`),'没有匹配的服务');const monitored=serviceCache.filter(s=>s.monitored);rows('monitoredServices',monitored.map(s=>`<div class="row"><span><b>${esc(s.monitor_name)}</b> <span class="badge ${s.paused?'':s.active==='active'?'good':'bad'}">${s.paused?'监控已暂停':s.active==='active'?'运行中':'服务已停止'}</span><br><span class="muted">${esc(s.unit)}</span><br><span class="muted">备注：${esc(s.note||'未填写')}</span></span><span class="row-actions"><button data-monitor-action="${s.paused?'resume':'pause'}" data-unit="${esc(s.unit)}">${s.paused?'恢复监控':'暂停监控'}</button><button data-service-action="${s.active==='active'?'stop':'start'}" data-unit="${esc(s.unit)}" ${s.protected&&s.active==='active'?'disabled title="API 服务不能停止自身"':''}>${s.active==='active'?'停止服务':'启动服务'}</button><button data-select-service="${esc(s.unit)}">编辑</button><button class="danger" data-delete-monitor="${esc(s.unit)}">删除监控</button></span></div>`),'尚未监控任何服务');document.querySelectorAll('[data-select-service]').forEach(b=>b.onclick=()=>selectService(b.dataset.selectService));document.querySelectorAll('[data-monitor-action]').forEach(b=>b.onclick=()=>monitorAction(b.dataset.unit,b.dataset.monitorAction));document.querySelectorAll('[data-service-action]').forEach(b=>b.onclick=()=>serviceAction(b.dataset.unit,b.dataset.serviceAction));document.querySelectorAll('[data-delete-monitor]').forEach(b=>b.onclick=()=>deleteMonitor(b.dataset.deleteMonitor))}
+function renderConfig(){const ss=sectionOrder.filter(s=>original[s]);$('configMenu').innerHTML=ss.map((s,i)=>`<button class="${i===0?'active':''}" data-config-section="${s}">${tr(sectionMeta[s]?.[0]||s)}</button>`).join('');$('configRows').innerHTML=ss.map((s,i)=>`<section class="config-page ${i===0?'active':''}" data-config-page="${s}"><h2>${tr(sectionMeta[s]?.[0]||s)}</h2><p class="muted">${tr(sectionMeta[s]?.[1]||'')}</p>${s==='led'?renderLed(original[s]):s==='services'?renderServices():s==='hosts'?renderHosts(original[s]):renderGeneral(s,original[s])}</section>`).join('');$('configMenu').onclick=e=>{const b=e.target.closest('button');if(!b)return;document.querySelectorAll('[data-config-section]').forEach(x=>x.classList.toggle('active',x===b));document.querySelectorAll('[data-config-page]').forEach(x=>x.classList.toggle('active',x.dataset.configPage===b.dataset.configSection));if(b.dataset.configSection==='services')loadServices()};$('configRows').oninput=e=>{if(e.target.matches('[data-color-prefix]')){const p=e.target.dataset.colorPrefix,v=e.target.value;['r','g','b'].forEach((c,i)=>{document.querySelector(`[data-section="led"][data-key="${p}_${c}"]`).value=parseInt(v.slice(1+i*2,3+i*2),16)})}if(e.target.matches('[data-section="led"],[data-color-prefix]'))updateConditional();if(e.target.matches('[data-section]'))markChanged()};$('refreshServices')?.addEventListener('click',loadServices);$('serviceSearch')?.addEventListener('input',renderServiceLists);$('saveMonitor')?.addEventListener('click',saveMonitor);$('resetMonitor')?.addEventListener('click',resetMonitorForm);$('saveHost')?.addEventListener('click',saveHost);document.querySelectorAll('[data-delete-host]').forEach(b=>b.onclick=()=>deleteHost(b.dataset.deleteHost));updateConditional()}
+function markChanged(){let n=0;document.querySelectorAll('#configRows [data-section]').forEach(i=>{if(i.value!==original[i.dataset.section][i.dataset.key])n++});$('saveState').textContent=n?(LANG==='zh'?`有 ${n} 项尚未保存`:`${n} unsaved changes`):tr('尚未修改');$('saveState').className=n?'':'muted'}
+tabs.forEach(b=>b.onclick=()=>{tabs.forEach(x=>x.classList.toggle('active',x===b));['overview','logs','config'].forEach(id=>$(id).classList.toggle('hidden',id!==b.dataset.tab));if(b.dataset.tab==='logs')loadLogs();if(b.dataset.tab==='config')loadConfig()});async function get(url,opt){const r=await fetch(url,opt),text=await r.text();let j;try{j=JSON.parse(text)}catch{throw Error(LANG==='zh'?`服务器返回异常 (${r.status})`:`Invalid server response (${r.status})`)}if(!r.ok)throw Error(j.error||(LANG==='zh'?`请求失败 (${r.status})`:`Request failed (${r.status})`));return j}function rows(target,items,empty='暂无数据'){$(target).innerHTML=items.length?items.join(''):`<div class="muted">${empty}</div>`}
+let serviceCache=[],editingServiceName='',serviceReadOnly=false;function tokenHeaders(){const token=$('token').value.trim();localStorage.setItem('pigwayToken',token);return{'Content-Type':'application/json','Authorization':`Bearer ${token}`}}
+async function loadServices(){if(!$('systemServices'))return;try{serviceReadOnly=!fleetHosts.find(x=>x.id===currentConfigHost)?.local;const d=await get(`/api/v1/services?host=${encodeURIComponent(currentConfigHost)}`);serviceCache=d.services;renderServiceLists()}catch(e){$('systemServices').innerHTML=`<div class="error">${esc(e.message)}</div>`}}
+function renderServiceLists(){if(!$('systemServices'))return;const q=$('serviceSearch').value.trim().toLowerCase(),filtered=serviceCache.filter(s=>!q||`${s.unit} ${s.description} ${s.note}`.toLowerCase().includes(q));rows('systemServices',filtered.map(s=>`<div class="row"><span><b>${esc(s.unit)}</b><br><span class="muted">${esc(s.description||'暂无服务说明')} · ${esc(s.active==='active'?'正在运行':'未运行')}</span></span><span class="row-actions"><span class="badge ${s.monitored&&!s.paused?'good':''}">${s.monitored?(s.paused?'已暂停':'已监控'):'未监控'}</span><button data-select-service="${esc(s.unit)}">${s.monitored?'编辑监控':'加入监控'}</button></span></div>`),'没有匹配的服务');const monitored=serviceCache.filter(s=>s.monitored);rows('monitoredServices',monitored.map(s=>`<div class="row"><span><b>${esc(s.monitor_name)}</b> <span class="badge ${s.paused?'':s.active==='active'?'good':'bad'}">${s.paused?'监控已暂停':s.active==='active'?'运行中':'服务已停止'}</span><br><span class="muted">${esc(s.unit)}</span><br><span class="muted">备注：${esc(s.note||'未填写')}</span></span><span class="row-actions"><button data-monitor-action="${s.paused?'resume':'pause'}" data-unit="${esc(s.unit)}">${s.paused?'恢复监控':'暂停监控'}</button><button data-service-action="${s.active==='active'?'stop':'start'}" data-unit="${esc(s.unit)}" ${s.protected&&s.active==='active'?'disabled title="API 服务不能停止自身"':''}>${s.active==='active'?'停止服务':'启动服务'}</button><button data-select-service="${esc(s.unit)}">编辑</button><button class="danger" data-delete-monitor="${esc(s.unit)}">删除监控</button></span></div>`),'尚未监控任何服务');if(serviceReadOnly)document.querySelectorAll('#configRows button').forEach(b=>b.disabled=true);document.querySelectorAll('[data-select-service]').forEach(b=>b.onclick=()=>selectService(b.dataset.selectService));document.querySelectorAll('[data-monitor-action]').forEach(b=>b.onclick=()=>monitorAction(b.dataset.unit,b.dataset.monitorAction));document.querySelectorAll('[data-service-action]').forEach(b=>b.onclick=()=>serviceAction(b.dataset.unit,b.dataset.serviceAction));document.querySelectorAll('[data-delete-monitor]').forEach(b=>b.onclick=()=>deleteMonitor(b.dataset.deleteMonitor))}
 function selectService(unit){const s=serviceCache.find(x=>x.unit===unit);if(!s)return;editingServiceName=s.monitor_name||'';$('monitorTarget').value=s.unit;$('monitorName').value=s.monitor_name||s.unit.replace(/\.service$/,'').replace(/[^A-Za-z0-9_.-]/g,'_').slice(0,16).toUpperCase();$('monitorNote').value=s.note||s.description||'';$('serviceFormTitle').textContent=s.monitored?'编辑服务监控':'新建服务监控';$('serviceMessage').textContent='已自动填写，可继续修改。';$('monitorName').scrollIntoView({behavior:'smooth',block:'center'})}
 function resetMonitorForm(){editingServiceName='';$('monitorName').value='';$('monitorTarget').value='';$('monitorNote').value='';$('serviceFormTitle').textContent='新建服务监控';$('serviceMessage').textContent='';$('serviceMessage').className='muted'}
 async function saveMonitor(){const body={operation:'save',name:$('monitorName').value.trim(),target:$('monitorTarget').value.trim(),note:$('monitorNote').value.trim(),previous_name:editingServiceName};try{$('serviceMessage').textContent='正在保存…';await get('/api/v1/services',{method:'PUT',headers:tokenHeaders(),body:JSON.stringify(body)});resetMonitorForm();await loadServices();$('serviceMessage').textContent='保存成功';$('serviceMessage').className='success'}catch(e){$('serviceMessage').textContent=e.message;$('serviceMessage').className='error'}}
-async function deleteMonitor(unit){const s=serviceCache.find(x=>x.unit===unit);if(!s||!confirm(`确定删除 ${s.monitor_name} 的监控吗？\n不会删除或停止 ${unit}。`))return;try{await get('/api/v1/services',{method:'PUT',headers:tokenHeaders(),body:JSON.stringify({operation:'delete',name:s.monitor_name,target:s.unit,note:''})});await loadConfig();document.querySelector('[data-config-section="services"]')?.click()}catch(e){alert(e.message)}}
+async function deleteMonitor(unit){const s=serviceCache.find(x=>x.unit===unit);if(!s||!confirm(LANG==='zh'?`确定删除 ${s.monitor_name} 的监控吗？\n不会删除或停止 ${unit}。`:`Remove monitoring for ${s.monitor_name}?\nThis will not remove or stop ${unit}.`))return;try{await get('/api/v1/services',{method:'PUT',headers:tokenHeaders(),body:JSON.stringify({operation:'delete',name:s.monitor_name,target:s.unit,note:''})});await loadConfig();document.querySelector('[data-config-section="services"]')?.click()}catch(e){alert(e.message)}}
 async function monitorAction(unit,action){const s=serviceCache.find(x=>x.unit===unit);if(!s)return;try{await get('/api/v1/services',{method:'PUT',headers:tokenHeaders(),body:JSON.stringify({operation:action,name:s.monitor_name,target:s.unit,note:s.note||''})});await loadServices()}catch(e){alert(e.message)}}
-async function serviceAction(unit,action){if(!confirm(`确定${action==='start'?'启动服务':'停止服务'} ${unit} 吗？\n这会直接执行 systemctl ${action}。`))return;try{await get('/api/v1/services/control',{method:'PUT',headers:tokenHeaders(),body:JSON.stringify({unit,action})});setTimeout(loadServices,700)}catch(e){alert(e.message)}}
-async function loadStatus(){try{const s=await get('/api/v1/status'),y=s.system,n=s.network,d=s.display;$('dot').classList.add('ok');$('liveText').textContent='在线';$('identity').textContent=`版本 ${s.version} · 已运行 ${Math.floor(s.uptime_seconds/3600)} 小时 · ${new Date(s.timestamp*1000).toLocaleTimeString()}`;$('cpu').textContent=`${y.cpu_percent}%`;$('freq').textContent=`频率 ${y.cpu_freq_mhz} MHz`;$('temp').textContent=`${y.temperature_c}°C`;$('fan').textContent=`风扇 ${({OFF:'关闭',L1:'一档',L2:'二档',L3:'三档',L4:'四档',MAX:'全速'})[y.fan_name]||y.fan_name}`;$('memory').textContent=`${y.memory_percent}%`;$('disk').textContent=`${y.disk_percent}%`;$('network').textContent=`${n.kind==='WIF'?'无线网络':n.kind==='ETH'?'有线网络':n.kind} ${n.metric}`;$('address').textContent=`${n.interface} · ${n.ip_label==='IP4'?'IPv4':'IPv6'} ${n.ip} · 互联网${n.internet?'正常':'断开'}`;$('owner').textContent=ownerName(d.owner);$('rgb').textContent=`OLED：${ownerName(d.oled_page)} · RGB：${rgbName(d.rgb_mode)}`;rows('alerts',d.alerts.map(a=>`<div class="row"><span><b>${esc(ownerName(a.id))}</b><br><span class="muted">${esc(a.l2)} ${esc(a.l3)}</span></span><span class="badge bad">等级 ${a.severity} · 优先级 ${a.priority}</span></div>`),'当前没有告警');rows('watches',s.watches.map(w=>`<div class="row"><span><b>${esc(w.name)}</b><br><span class="muted">${w.type==='service'?'系统服务':'普通进程'} · ${esc(w.target)}</span></span><span class="badge ${w.up?'good':'bad'}">${w.up?'正常':'停止'}</span></div>`))}catch(e){$('dot').classList.remove('ok');$('liveText').textContent='离线';$('identity').textContent=e.message}}
+async function serviceAction(unit,action){if(!confirm(LANG==='zh'?`确定${action==='start'?'启动服务':'停止服务'} ${unit} 吗？\n这会直接执行 systemctl ${action}。`:`${action==='start'?'Start':'Stop'} ${unit}?\nThis runs systemctl ${action} directly.`))return;try{await get('/api/v1/services/control',{method:'PUT',headers:tokenHeaders(),body:JSON.stringify({unit,action})});setTimeout(loadServices,700)}catch(e){alert(e.message)}}
+function bytes(value){const n=Number(value||0);if(!n)return'--';const units=['B','KB','MB','GB','TB'];let x=n,i=0;while(x>=1024&&i<units.length-1){x/=1024;i++}return`${x>=100||i===0?x.toFixed(0):x.toFixed(1)} ${units[i]}`}
+function meter(percent){const p=Math.max(0,Math.min(100,Number(percent||0)));return`<div class="progress"><span style="width:${p}%"></span></div>`}
+function hostCard(entry){const h=entry.host;if(!entry.online)return`<article class="panel host-panel offline-card"><div class="host-head"><div><h2>${esc(h.name||h.id)}</h2><div class="device-details"><span>ID ${esc(h.id)}</span><span>${esc(h.url||tr('本机'))}</span></div></div><span class="badge bad">${tr('离线')}</span></div><div class="error">${esc(entry.error||tr('连接失败'))}</div></article>`;const s=entry.status,y=s.system||{},n=s.network||{},d=s.display||{},v=s.device||{},m=s.machine||h,signal=n.signal_percent,memUsed=y.memory_used_bytes,memTotal=y.memory_total_bytes,diskUsed=y.disk_used_bytes,diskTotal=y.disk_total_bytes;return`<article class="panel host-panel"><div class="host-head"><div><h2>${esc(m.name||h.name||m.id)}</h2><div class="device-details"><span>ID ${esc(m.id||h.id)}</span><span>${LANG==='zh'?'主机名':'Hostname'} ${esc(m.hostname||v.hostname||'--')}</span><span>${esc(v.model||'--')}</span><span>${LANG==='zh'?'序列号':'Serial'} ${esc(v.serial||'--')}</span><span>${LANG==='zh'?'硬件版本':'Revision'} ${esc(v.revision||'--')}</span><span>${esc(v.os||'--')}</span><span>${LANG==='zh'?'内核':'Kernel'} ${esc(v.kernel||'--')}</span><span>${esc(v.architecture||'--')} · CPU ${esc(v.cpu_count||'--')}</span><span>${LANG==='zh'?'程序版本':'Agent'} ${esc(s.version||'--')}</span></div></div><span class="badge good">${tr('在线')}</span></div><div class="host-grid"><div class="metric"><div class="muted">${tr('处理器负载')}</div><div class="value">${esc(y.cpu_percent)}%</div><div class="muted">${LANG==='zh'?'频率':'Frequency'} ${esc(y.cpu_freq_mhz)} MHz · ${esc(y.temperature_c)}°C · ${LANG==='zh'?'风扇':'Fan'} ${esc(y.fan_name)}</div></div><div class="metric"><div class="muted">${tr('内存占用')}</div><div class="value">${esc(y.memory_percent)}%</div>${meter(y.memory_percent)}<div class="muted">${bytes(memUsed)} / ${bytes(memTotal)} · ${LANG==='zh'?'可用':'Available'} ${bytes(y.memory_available_bytes)}</div></div><div class="metric"><div class="muted">${tr('磁盘占用')}</div><div class="value">${esc(y.disk_percent)}%</div>${meter(y.disk_percent)}<div class="muted">${bytes(diskUsed)} / ${bytes(diskTotal)} · ${LANG==='zh'?'剩余':'Free'} ${bytes(y.disk_free_bytes)}</div></div><div class="metric"><div class="muted">${tr('主网络')}</div><div class="value">${n.kind==='WIF'&&signal!==null&&signal!==undefined?`${esc(signal)}%`:esc(n.kind||'--')}</div>${n.kind==='WIF'?meter(signal):''}<div class="muted">${esc(n.interface||'--')} · ${n.kind==='WIF'?`${esc(n.metric)} dBm · `:''}${esc(n.ip_label)} ${esc(n.ip)} · ${n.internet?(LANG==='zh'?'互联网正常':'Internet online'):(LANG==='zh'?'互联网断开':'Internet down')}</div></div><div class="metric"><div class="muted">${tr('显示状态')}</div><div class="value">${esc(ownerName(d.owner))}</div><div class="muted">OLED: ${esc(ownerName(d.oled_page))} · RGB: ${esc(rgbName(d.rgb_mode))}</div></div><div class="metric"><div class="muted">${tr('当前告警')}</div><div class="value">${(d.alerts||[]).length}</div><div class="muted">${(d.alerts||[]).map(a=>esc(ownerName(a.id))).join(' · ')||tr('无告警')}</div></div></div><div class="group"><h3>${tr('服务与进程监控')}</h3><div class="rows">${(s.watches||[]).map(w=>`<div class="row"><span>${esc(w.name)} · ${esc(w.target)}</span><span class="badge ${w.up?'good':'bad'}">${tr(w.up?'正常':'停止')}</span></div>`).join('')||`<div class="muted">${tr('暂无数据')}</div>`}</div></div></article>`}
+async function loadStatus(){try{const fleet=await get('/api/v1/fleet/status'),online=fleet.hosts.filter(x=>x.online);$('dot').classList.toggle('ok',online.length>0);$('liveText').textContent=LANG==='zh'?`${online.length}/${fleet.hosts.length} 在线`:`${online.length}/${fleet.hosts.length} online`;$('identity').textContent=LANG==='zh'?`多机监控 · ${fleet.hosts.length} 台设备 · ${new Date(fleet.timestamp*1000).toLocaleTimeString()}`:`Fleet monitoring · ${fleet.hosts.length} hosts · ${new Date(fleet.timestamp*1000).toLocaleTimeString()}`;$('hostCards').innerHTML=fleet.hosts.map(hostCard).join('');fleetHosts=fleet.hosts.map(x=>x.host);refreshHostSelectors()}catch(e){$('dot').classList.remove('ok');$('liveText').textContent=tr('离线');$('identity').textContent=e.message}}
 const severityNames={DEBUG:'调试',INFO:'信息',NOTICE:'注意',WARN:'警告',ERROR:'错误',CRITICAL:'严重',ALERT:'紧急',EMERGENCY:'紧急'};let logState={sort:'timestamp',order:'desc',offset:0,limit:100,total:0};
 function localDateValue(d){return`${d.getFullYear()}-${String(d.getMonth()+1).padStart(2,'0')}-${String(d.getDate()).padStart(2,'0')}`}
 function setLogRange(range){const now=new Date(),today=new Date(now.getFullYear(),now.getMonth(),now.getDate()),start=new Date(today),end=new Date(today);if(range==='all'){$('logStart').value='';$('logEnd').value='';return}if(range==='yesterday'){start.setDate(start.getDate()-1);end.setDate(end.getDate()-1)}else if(range==='week'){start.setDate(start.getDate()-((start.getDay()+6)%7))}else if(range==='month'){start.setDate(1)}$('logStart').value=localDateValue(start);$('logEnd').value=localDateValue(end)}
 function logTimestamp(value,end=false){if(!value)return'';const d=new Date(`${value}T00:00:00`);if(end)d.setDate(d.getDate()+1);return Math.floor(d.getTime()/1000)-(end?1:0)}
-async function loadLogs(reset=true){if(reset)logState.offset=0;try{const p=new URLSearchParams({limit:logState.limit,offset:logState.offset,sort:logState.sort,order:logState.order}),since=logTimestamp($('logStart').value),until=logTimestamp($('logEnd').value,true),severity=$('logSeverity').value,event=$('logEvent').value,search=$('logSearch').value.trim();if(since)p.set('since',since);if(until)p.set('until',until);if(severity)p.set('severity',severity);if(event)p.set('event',event);if(search)p.set('search',search);const d=await get(`/api/v1/logs?${p}`);logState.total=d.total;const selected=$('logEvent').value;$('logEvent').innerHTML='<option value="">全部事件</option>'+d.event_types.map(x=>`<option value="${esc(x)}" ${x===selected?'selected':''}>${esc(eventNames[x]||x)}</option>`).join('');$('logRows').innerHTML=d.logs.length?d.logs.map(x=>`<tr><td>${esc(new Date(x.timestamp/1000).toLocaleString())}</td><td><span class="badge ${['ERROR','CRITICAL','ALERT','EMERGENCY'].includes(x.severity)?'bad':''}">${esc(severityNames[x.severity]||x.severity)}</span></td><td>${esc(eventNames[x.event]||x.event)}</td><td class="log-message">${esc(x.message)}</td></tr>`).join(''):'<tr><td colspan="4" class="muted">没有符合条件的日志</td></tr>';$('logSummary').textContent=`共 ${d.total} 条 · 数据来源：systemd journal`;$('logPage').textContent=d.total?`${d.offset+1}–${Math.min(d.offset+d.limit,d.total)} / ${d.total}`:'0 条';$('logPrev').disabled=d.offset===0;$('logNext').disabled=d.offset+d.limit>=d.total;document.querySelectorAll('[data-log-sort]').forEach(b=>{const name=b.textContent.replace(/[ ↑↓]$/,'');b.textContent=name+(b.dataset.logSort===logState.sort?(logState.order==='asc'?' ↑':' ↓'):'')})}catch(e){$('logRows').innerHTML=`<tr><td colspan="4" class="error">${esc(e.message)}</td></tr>`}}
-async function loadConfig(){try{const d=await get('/api/v1/config');original=d.config;renderConfig();markChanged()}catch(e){$('configRows').innerHTML=`<div class="error">${esc(e.message)}</div>`}}
-document.querySelectorAll('[data-log-range]').forEach(b=>b.onclick=()=>{setLogRange(b.dataset.logRange);loadLogs()});document.querySelectorAll('[data-log-sort]').forEach(b=>b.onclick=()=>{const s=b.dataset.logSort;if(logState.sort===s)logState.order=logState.order==='asc'?'desc':'asc';else{logState.sort=s;logState.order=s==='timestamp'?'desc':'asc'}loadLogs()});$('refreshLogs').onclick=()=>loadLogs();$('resetLogs').onclick=()=>{setLogRange('today');$('logSeverity').value='';$('logEvent').value='';$('logSearch').value='';logState.sort='timestamp';logState.order='desc';loadLogs()};$('logPrev').onclick=()=>{logState.offset=Math.max(0,logState.offset-logState.limit);loadLogs(false)};$('logNext').onclick=()=>{if(logState.offset+logState.limit<logState.total){logState.offset+=logState.limit;loadLogs(false)}};setLogRange('today');$('token').value=localStorage.getItem('pigwayToken')||'';$('toggleToken').onclick=()=>{const i=$('token'),show=i.type==='password';i.type=show?'text':'password';$('toggleToken').textContent=show?'隐藏令牌':'显示令牌'};$('saveConfig').onclick=async()=>{const token=$('token').value.trim();localStorage.setItem('pigwayToken',token);const updates={};document.querySelectorAll('#configRows [data-section]').forEach(i=>{if(i.value!==original[i.dataset.section][i.dataset.key]){(updates[i.dataset.section]??={})[i.dataset.key]=i.value}});if(!Object.keys(updates).length){$('saveState').textContent='没有需要保存的修改';return}try{$('saveConfig').disabled=true;$('saveState').textContent='正在保存并应用…';const d=await get('/api/v1/config',{method:'PUT',headers:{'Content-Type':'application/json','Authorization':`Bearer ${token}`},body:JSON.stringify({updates})});$('saveState').textContent=`保存成功，已创建备份 ${d.backup}`;$('saveState').className='success';setTimeout(loadConfig,1500)}catch(e){$('saveState').textContent=e.message;$('saveState').className='error'}finally{$('saveConfig').disabled=false}};loadStatus();setInterval(loadStatus,3000);
+async function loadLogs(reset=true){if(reset)logState.offset=0;try{const p=new URLSearchParams({limit:logState.limit,offset:logState.offset,sort:logState.sort,order:logState.order}),since=logTimestamp($('logStart').value),until=logTimestamp($('logEnd').value,true),severity=$('logSeverity').value,event=$('logEvent').value,machine=$('logMachine').value,search=$('logSearch').value.trim();if(since)p.set('since',since);if(until)p.set('until',until);if(severity)p.set('severity',severity);if(event)p.set('event',event);if(machine)p.set('machine',machine);if(search)p.set('search',search);const d=await get(`/api/v1/fleet/logs?${p}`);logState.total=d.total;const selectedEvent=$('logEvent').value,selectedMachine=$('logMachine').value;$('logEvent').innerHTML=`<option value="">${tr('全部事件')}</option>`+d.event_types.map(x=>`<option value="${esc(x)}" ${x===selectedEvent?'selected':''}>${esc(eventName(x))}</option>`).join('');$('logMachine').innerHTML=`<option value="">${LANG==='zh'?'全部机器':'All hosts'}</option>`+d.machines.map(x=>`<option value="${esc(x.id)}" ${x.id===selectedMachine?'selected':''}>${esc(x.name)} · ${esc(x.id)}</option>`).join('');$('logRows').innerHTML=d.logs.length?d.logs.map(x=>`<tr><td>${esc(new Date(x.timestamp/1000).toLocaleString())}</td><td>${esc(x.machine_name||x.machine_id)}</td><td><span class="badge ${['ERROR','CRITICAL','ALERT','EMERGENCY'].includes(x.severity)?'bad':''}">${esc(tr(severityNames[x.severity]||x.severity))}</span></td><td>${esc(eventName(x.event))}</td><td class="log-message">${esc(x.message)}</td></tr>`).join(''):`<tr><td colspan="5" class="muted">${tr('没有符合条件的日志')}</td></tr>`;$('logSummary').textContent=LANG==='zh'?`共 ${d.total} 条 · 数据来源：各机器 systemd journal`:`${d.total} events · Source: each host's systemd journal`;$('logPage').textContent=d.total?`${d.offset+1}–${Math.min(d.offset+d.limit,d.total)} / ${d.total}`:(LANG==='zh'?'0 条':'0 events');$('logPrev').disabled=d.offset===0;$('logNext').disabled=d.offset+d.limit>=d.total;document.querySelectorAll('[data-log-sort]').forEach(b=>{const names={timestamp:LANG==='zh'?'时间':'Time',machine:LANG==='zh'?'机器':'Host',severity:LANG==='zh'?'程度':'Severity',event:LANG==='zh'?'事件类型':'Event type',message:LANG==='zh'?'内容':'Message'},name=names[b.dataset.logSort];b.textContent=name+(b.dataset.logSort===logState.sort?(logState.order==='asc'?' ↑':' ↓'):'')})}catch(e){$('logRows').innerHTML=`<tr><td colspan="5" class="error">${esc(e.message)}</td></tr>`}}
+function hostToken(id){return localStorage.getItem(`pigwayToken:${id}`)||localStorage.getItem('pigwayToken')||''}
+function saveHostToken(id,value){localStorage.setItem(`pigwayToken:${id}`,value);if(fleetHosts.find(x=>x.id===id)?.local)localStorage.setItem('pigwayToken',value)}
+function refreshHostSelectors(){if(!fleetHosts.length)return;const current=$('configHost').value||currentConfigHost||fleetHosts[0].id,checked=new Set([...document.querySelectorAll('#syncHosts input:checked')].map(x=>x.value));$('configHost').innerHTML=fleetHosts.map(h=>`<option value="${esc(h.id)}" ${h.id===current?'selected':''}>${esc(h.name||h.id)} · ${esc(h.id)}</option>`).join('');currentConfigHost=$('configHost').value;$('syncHosts').innerHTML=fleetHosts.map(h=>`<label><input type="checkbox" value="${esc(h.id)}" ${checked.has(h.id)?'checked':''}>${esc(h.name||h.id)}</label>`).join('')}
+function changedUpdates(){const updates={};document.querySelectorAll('#configRows [data-section]').forEach(i=>{if(original[i.dataset.section]&&i.value!==original[i.dataset.section][i.dataset.key]){(updates[i.dataset.section]??={})[i.dataset.key]=i.value}});return updates}
+async function ensureHosts(){if(fleetHosts.length)return;const d=await get('/api/v1/hosts');fleetHosts=d.hosts;refreshHostSelectors()}
+async function loadConfig(){try{await ensureHosts();currentConfigHost=$('configHost').value||currentConfigHost||fleetHosts[0].id;$('token').value=hostToken(currentConfigHost);const d=await get(`/api/v1/config?host=${encodeURIComponent(currentConfigHost)}`);original=d.config;renderConfig();markChanged()}catch(e){$('configRows').innerHTML=`<div class="error">${esc(e.message)}</div>`}}
+async function saveHost(){const id=$('hostId').value.trim(),url=$('hostUrl').value.trim(),message=$('hostMessage');try{message.textContent='正在保存…';const local=fleetHosts.find(x=>x.local),token=hostToken(local?.id||'');const d=await get('/api/v1/hosts',{method:'PUT',headers:{'Content-Type':'application/json','Authorization':`Bearer ${token}`},body:JSON.stringify({operation:'save',id,url})});fleetHosts=d.hosts;refreshHostSelectors();await loadConfig();message.textContent='保存成功'}catch(e){message.textContent=e.message;message.className='error'}}
+async function deleteHost(id){if(!confirm(LANG==='zh'?`确定删除机器 ${id} 吗？`:`Delete host ${id}?`))return;try{const local=fleetHosts.find(x=>x.local),token=hostToken(local?.id||'');const d=await get('/api/v1/hosts',{method:'PUT',headers:{'Content-Type':'application/json','Authorization':`Bearer ${token}`},body:JSON.stringify({operation:'delete',id})});fleetHosts=d.hosts;currentConfigHost=local?.id||'';refreshHostSelectors();await loadConfig()}catch(e){alert(e.message)}}
+async function applyConfig(targets){const updates=changedUpdates();if(targets.length>1){delete updates.device;delete updates.hosts;}if(!Object.keys(updates).length){$('saveState').textContent=tr('没有需要保存的修改');return}const local=fleetHosts.find(x=>x.local),tokens=Object.fromEntries(targets.map(id=>[id,hostToken(id)]));try{$('saveConfig').disabled=true;$('syncConfig').disabled=true;$('saveState').textContent=tr('正在保存并应用…');saveHostToken(currentConfigHost,$('token').value.trim());tokens[currentConfigHost]=$('token').value.trim();const d=await get('/api/v1/fleet/config',{method:'PUT',headers:{'Content-Type':'application/json','Authorization':`Bearer ${hostToken(local?.id||'')}`},body:JSON.stringify({targets,updates,tokens})});const failed=d.results.filter(x=>!x.ok);$('saveState').textContent=failed.length?(LANG==='zh'?`部分失败：${failed.map(x=>`${x.id}: ${x.error}`).join('；')}`:`Partial failure: ${failed.map(x=>`${x.id}: ${x.error}`).join('; ')}`):(LANG==='zh'?`已同步到 ${d.results.length} 台机器`:`Synced to ${d.results.length} hosts`);$('saveState').className=failed.length?'error':'success';if(!failed.length)setTimeout(loadConfig,1200)}catch(e){$('saveState').textContent=e.message;$('saveState').className='error'}finally{$('saveConfig').disabled=false;$('syncConfig').disabled=false}}
+document.querySelectorAll('[data-log-range]').forEach(b=>b.onclick=()=>{setLogRange(b.dataset.logRange);loadLogs()});document.querySelectorAll('[data-log-sort]').forEach(b=>b.onclick=()=>{const value=b.dataset.logSort;if(logState.sort===value)logState.order=logState.order==='asc'?'desc':'asc';else{logState.sort=value;logState.order=value==='timestamp'?'desc':'asc'}loadLogs()});$('refreshLogs').onclick=()=>loadLogs();$('resetLogs').onclick=()=>{setLogRange('today');$('logSeverity').value='';$('logMachine').value='';$('logEvent').value='';$('logSearch').value='';logState.sort='timestamp';logState.order='desc';loadLogs()};$('logPrev').onclick=()=>{logState.offset=Math.max(0,logState.offset-logState.limit);loadLogs(false)};$('logNext').onclick=()=>{if(logState.offset+logState.limit<logState.total){logState.offset+=logState.limit;loadLogs(false)}};
+const language=$('language'),theme=$('theme'),themeMedia=matchMedia('(prefers-color-scheme: dark)');language.value=LANG;theme.value=localStorage.getItem('pigwayTheme')||'auto';applyTheme(theme.value);language.onchange=()=>{LANG=language.value;localStorage.setItem('pigwayLanguage',LANG);location.reload()};theme.onchange=()=>{localStorage.setItem('pigwayTheme',theme.value);applyTheme(theme.value)};themeMedia.addEventListener?.('change',()=>{if(theme.value==='auto')applyTheme('auto')});translateNode();new MutationObserver(ms=>ms.forEach(m=>m.addedNodes.forEach(n=>{if(n.nodeType===Node.ELEMENT_NODE)translateNode(n);else if(n.nodeType===Node.TEXT_NODE){const map=LANG==='en'?EN:ZH,trim=n.nodeValue.trim();if(map[trim])n.nodeValue=n.nodeValue.replace(trim,map[trim])}}))).observe(document.body,{childList:true,subtree:true});document.documentElement.lang=LANG==='zh'?'zh-CN':'en';setLogRange('today');$('toggleToken').onclick=()=>{const i=$('token'),show=i.type==='password';i.type=show?'text':'password';$('toggleToken').textContent=tr(show?'隐藏令牌':'显示令牌')};$('token').onchange=()=>saveHostToken(currentConfigHost,$('token').value.trim());$('configHost').onchange=()=>{currentConfigHost=$('configHost').value;$('token').value=hostToken(currentConfigHost);loadConfig()};$('saveConfig').onclick=()=>applyConfig([currentConfigHost]);$('syncConfig').onclick=()=>{const targets=[...document.querySelectorAll('#syncHosts input:checked')].map(x=>x.value);if(!targets.length){$('saveState').textContent=LANG==='zh'?'请先选择同步目标机器':'Select target hosts first';return}applyConfig(targets)};loadStatus();setInterval(loadStatus,3000);
 </script></body></html>