fix: polish themes and language consistency

README.md

@@ -1,8 +1,8 @@
-# Pigway Pi Control v3.6.0
+# PIGWay Pi Control v3.7.0
 
 Raspberry Pi 4B + 配套 128×32 OLED / 风扇 / RGB 散热扩展板的本机硬件监控 Agent。
 
-v3.6.0 在本地硬件监控、显示仲裁和可配置 RGB 告警基础上，增加轻量状态/日志/配置 API 与同源 Web 管理界面。
+v3.7.0 在现有本机硬件监控基础上增加多机状态、日志和配置管理；未登记其他节点时继续作为完整的单机版本运行。
 
 ## 已有核心功能
 
@@ -71,9 +71,11 @@ CHECK STORAGE
 
 每个当前故障都是 DisplayController 中的一个 active request，包含稳定 ID、priority、severity、OLED 显示数据、首次发现时间、最后变化时间和元数据。监控只提交或清除 request，同一轮采样作为一个原子批次，全部更新后只仲裁一次。DisplayController 始终只选一个最高优先级 owner；同一 ID 更新原请求而不重复入队，恢复时删除请求，同优先级新 request 排队而不抢占，owner 恢复后按 priority、first_seen、ID 重新仲裁。OLED 在主页和全部当前告警页之间轮播，告警页右上角显示 `当前页/告警总数`，新 owner 会立即抢占一次 OLED。告警页显示时 RGB 同步表达该页对象；回到主页时 RGB 保持最高优先级 active owner，全部恢复后才 OFF。历史 power flags 只进入 diagnose 和一次性 Journal 记录。
 
-### 5. RGB 告警引擎
+### 5. RGB 正常状态与告警引擎
 
-RGB 模式由当前 OLED 告警页决定；OLED 位于主页时则使用最高优先级 active owner。颜色表示故障对象：CPU负载、频率、throttling、温度与散热相关为红色，供电/欠压为橙色，内存为紫色，存储为白色，网络/Wi-Fi 为蓝色，服务/进程为青色。频率表示严重等级：默认 Warning 为1500ms亮/1500ms灭，Critical 为750ms亮/750ms灭，Emergency 为300ms亮/300ms灭；没有 active alert 时 OFF。`[led]` 可分别配置六类对象的 R/G/B 值，以及三个严重等级的亮灯和灭灯时长，非法颜色值会限制到0..255，间隔最小为50ms。每次点亮使用 v3.2.0 已验证的完整 selector/R/G/B 写入顺序，只在亮/灭边沿写 MCU，不做高频软件 PWM。相邻页面 RGB mode 相同时不关闭、不重启节奏。动画不写循环日志，owner 变化记录 `DISPLAY_OWNER`，实际模式变化才记录 `RGB_MODE`。
+没有 active alert 时，RGB 默认全灭。`[led] normal_mode` 可改为自定义颜色常亮/闪烁，或 MCU 已确认的流水、呼吸、跑马、彩虹和炫彩效果。常亮与闪烁使用 0..255 的自定义 R/G/B；内置流水/呼吸使用 MCU 固定的红、绿、蓝、黄、紫、青、白七色和慢/中/快三档速度，跑马/彩虹/炫彩由 MCU 自行配色。内置效果只在模式切换时按 speed → color → effect 的实机校准顺序写一次寄存器，不循环刷 I²C。
+
+任何 active alert 都会立即抢占正常效果。RGB 告警模式由当前 OLED 告警页决定；OLED 位于主页时则使用最高优先级 active owner。颜色表示故障对象：CPU负载、频率、throttling、温度与散热相关为红色，供电/欠压为橙色，内存为紫色，存储为白色，网络/Wi-Fi 为蓝色，服务/进程为青色。频率表示严重等级：默认 Warning 为1500ms亮/1500ms灭，Critical 为750ms亮/750ms灭，Emergency 为300ms亮/300ms灭。`[led]` 可分别配置六类对象的 R/G/B 值，以及三个严重等级的亮灯和灭灯时长，非法颜色值会限制到0..255，间隔最小为50ms。每次点亮使用 v3.2.0 已验证的完整 selector/R/G/B 写入顺序，只在亮/灭边沿写 MCU，不做高频软件 PWM。相邻页面 RGB mode 相同时不关闭、不重启节奏。动画不写循环日志，owner 变化记录 `DISPLAY_OWNER`，实际模式变化才记录 `RGB_MODE`。
 
 ### 6. 结构化事件日志
 
@@ -82,7 +84,7 @@ RGB 模式由当前 OLED 告警页决定；OLED 位于主页时则使用最高
 只在 **状态发生变化** 时记录关键事件，避免每秒刷屏。例如：
 
 ```text
-level=INFO event=START version=3.6.0
+level=INFO event=START version=3.7.0
 level=INFO event=NET_SWITCH old_if=eth0 new_if=wlan0 ...
 level=WARN event=NETWORK_DOWN ...
 level=INFO event=NETWORK_RECOVERED ...
@@ -136,6 +138,36 @@ RGB 保留卖家 MCU 0x0D 寄存器协议。实机校准确认静态自定义颜
 
 Pi 红色 PWR 灯关机后恢复硬件默认亮起的行为不强行修改，可作为“系统已关机但 UPS 仍供电”的直观提示。
 
+## v3.7.0 多机监控
+
+每台机器在 `[device]` 中设置稳定标识和显示名称；保留 `auto` 时读取本机 hostname。作为 Web 聚合入口的机器可在 `[hosts]` 中登记其他已安装 PIGWay Pi Control 的节点：
+
+```ini
+[device]
+identifier = living-room
+name = 客厅树莓派
+
+[hosts]
+study = http://192.168.1.20:6001
+nas-room = http://192.168.1.21:6001
+```
+
+未设置 `[hosts]` 时，API 和 Web 保持单机使用方式。聚合入口通过各节点现有 HTTP API 读取状态、journal 和配置；节点不可达时会在机器卡片上显示离线，不影响其他节点。
+
+新增接口：
+
+```text
+GET /api/v1/hosts
+PUT /api/v1/hosts
+GET /api/v1/fleet/status
+GET /api/v1/fleet/logs
+PUT /api/v1/fleet/config
+```
+
+运行状态按机器显示独立卡片，包括机器标识、hostname、型号、序列号、板卡版本、操作系统、内核、架构、CPU 核数和 Agent 版本。内存和根分区同时显示百分比、已用量、总量及可用/剩余量；Wi-Fi 以 0–100% 为主值，并保留原始 dBm。OLED 的 Wi-Fi 主值同样使用百分比。
+
+事件日志增加机器列、机器筛选和机器排序。系统配置可选择目标机器；批量同步只发送当前已修改的配置项，并逐台返回成功或失败结果。远端 Bearer Token 只保存在当前浏览器的 localStorage 中，不写入聚合机器配置文件。
+
 ## v3.6.0 API 与 Web
 
 安装后访问：
@@ -160,8 +192,13 @@ GET /api/v1/health
 GET /api/v1/status
 GET /api/v1/logs?limit=200
 GET /api/v1/config
+GET /api/v1/services
 ```
 
+日志接口支持 `since`、`until` Unix 时间戳，`severity`、`event`、`search` 筛选，`timestamp` / `severity` / `event` / `message` 排序，以及 `limit` / `offset` 分页。Web 提供今天、昨天、本周、本月和全部快捷范围。日志直接读取 systemd journal 的现有保留数据，不建立重复的 SQLite 日志副本。
+
+Web 界面支持中文和 English 切换，并将结构化 journal 事件类型显示为当前界面的语言；journal 内部稳定的事件标识保持不变，便于脚本筛选。外观可选择自动、深色或浅色，自动模式跟随浏览器/操作系统配色。语言和外观偏好只保存在当前浏览器中。
+
 配置写入接口：
 
 ```text
@@ -172,6 +209,10 @@ Content-Type: application/json
 {"updates":{"led":{"service_b":"96"},"api":{"port":"6001"}}}
 ```
 
+服务监控页面会列出本机 systemd 服务，并标识“已监控/未监控”。添加、编辑或删除监控使用 `PUT /api/v1/services`；启动或停止服务使用 `PUT /api/v1/services/control`，两者均要求 Bearer Token。API 服务不能通过自己的请求停止自身，其他服务由用户自行管理。监控备注保存在配置文件的 `[service_notes]`，不会参与硬件 Agent 的监控判断。
+
+“暂停监控/恢复监控”只改变 PIGWay 是否检查该服务，不会启动或停止 systemd unit；暂停状态保存在 `[service_monitor_disabled]`。只有明确标注为“启动服务/停止服务”的按钮才会调用 systemctl。
+
 读取 token：
 
 ```bash
@@ -208,6 +249,7 @@ sudo ./install.sh
 - 安装必要依赖
 - 检查 I²C，并在安装前检测 `/dev/i2c-1` 是否被其他 OLED/LED 控制进程占用
 - 发现冲突时列出进程并退出，由用户决定如何处理；安装器不会停止、禁用或杀死其他服务
+- 确认需要多个进程共用 I²C 时，可用 `sudo ./install.sh --force-i2c-conflict` 强制继续；冲突进程仍由用户自行管理
 - 安装字体、程序、配置和 systemd unit
 - 完整保留用户现有配置（包括所有 section、用户值和注释），仅补入缺失的 `[led]` 和 `[api]` 选项，已有用户值优先
 - 生成只读 root token，安装 API/Web 文件
@@ -230,3 +272,4 @@ sudo /usr/local/sbin/pigway-pi-control --diagnose
 - v3.2.0：主网络接口 / Wi-Fi RSSI / ETH速率 / 双网切换
 - v3.5.0：System Health、显示仲裁与可配置 RGB 告警
 - **v3.6.0：轻量状态/日志/配置 API 与同源 Web 管理界面**
+- **v3.7.0：多机状态卡片、聚合日志、机器配置选择与批量同步**

SHA256SUMS

@@ -1,10 +1,10 @@
-0960943a15ae23cd067f1169df6640723500107e8c41af070b0c9b889f29914e  README.md
+96dfd20c3ad16ca62a46d66eb5ffb82b1f7f987e66c4dae5310609b1989b7dae  README.md
 72c46162c33f9587c6ccb01ad53fbaaf4ecec8cd21014b909e87e8707e253e36  app/oled_font_5x7.bin
-29f59e41052e1e251bf2f38274cdd321fc195602220b61ac8890202128d7c50a  app/pigway_pi_control.py
-f32be5b63fe2be51e39c106c232ae3cc14dab7c0c3719e2609b9e93a7802b6c3  app/pigway_pi_control_api.py
-9f3b2be557b3cd93c309f8a1cadce7d34b23ca06c1ff69231d934e8180fefb48  config/pigway-pi-control.conf
-15b431e62b00886b6561597db059f01f116b5173bdae7a5817f617f7bc73a3ec  install.sh
-81aea0a89b298b2512fcb9bf6418618ba7a66474d425390cf95a0128c4093474  systemd/pigway-pi-control.service
-5d7562c496de597f61b62af48f8f6350ad270e1ebf725426d9f1e5b5d698055e  systemd/pigway-pi-control-api.service
+d0fa68951097a90eb6f51b36e56dc935d8fd7632c3de0ad6bff0b448960a7c03  app/pigway_pi_control.py
+034931590d83969f9f24222cc57800ab193588beea3d3dcedb98f1690000370d  app/pigway_pi_control_api.py
+ee0f682e8016f75f906d974f00c3e3340edddf30447d441ddfd61a7a34c9e83c  config/pigway-pi-control.conf
+f9fbb4defa45b43abe0ce66973b1f4d553369b3a43c01d04f206c573f7dc96ca  install.sh
+4f6e8db3698a62f57823d3298a0e6814593de6fa3d31e4751b7ea4a76e553e35  systemd/pigway-pi-control.service
+aa21cef9a06593371ccff005335b6c0c826fbf4b5c48e4255b5f4b75ce6e9217  systemd/pigway-pi-control-api.service
 9f59e7313ee58e687ae6dd29d175c67082674254ac5c5f54168b2735b64c20a4  uninstall.sh
-4b4066d104202f664f5df07c97d4e256dde32b5f4426e6a955a3ecef5e08df60  web/index.html
+3a40109f11bea2d44e9d61bed4a90499a5047c4fc534f97aaa90becbf9e57017  web/index.html

app/pigway_pi_control.py

@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
-import time,socket,subprocess,configparser,signal,re,errno,threading,argparse,json
+import time,socket,subprocess,configparser,signal,re,errno,threading,argparse,json,os,platform
 from pathlib import Path
-APP_VERSION="3.6.0"
+APP_VERSION="3.7.0"
 from smbus2 import SMBus
 from PIL import Image
 from shutil import disk_usage
@@ -29,6 +29,41 @@ def load_average():
         x=Path("/proc/loadavg").read_text().split();return (float(x[0]),float(x[1]),float(x[2]))
     except Exception:return (0.0,0.0,0.0)
 
+def memory_usage():
+    try:
+        values={}
+        for line in Path("/proc/meminfo").read_text().splitlines():
+            key,value=line.split(":",1); values[key]=int(value.split()[0])*1024
+        total=values["MemTotal"]; available=values.get("MemAvailable",values.get("MemFree",0))
+        used=max(0,total-available)
+        return total,used,available,(used*100.0/total if total else 0.0)
+    except Exception:return 0,0,0,0.0
+
+def wifi_percent(metric):
+    try:return max(0,min(100,round((float(metric)+100.0)*2.0)))
+    except Exception:return None
+
+def device_details():
+    info={}
+    try:
+        for line in Path("/proc/cpuinfo").read_text().splitlines():
+            if ":" in line:
+                key,value=(x.strip() for x in line.split(":",1))
+                if key in ("Serial","Revision","Hardware","Model"): info[key.lower()]=value
+    except Exception: pass
+    try: info["model"]=Path("/proc/device-tree/model").read_bytes().rstrip(b"\0").decode()
+    except Exception: pass
+    try:
+        os_release={}
+        for line in Path("/etc/os-release").read_text().splitlines():
+            if "=" in line:
+                key,value=line.split("=",1); os_release[key]=value.strip().strip('"')
+        info["os"]=os_release.get("PRETTY_NAME",platform.platform())
+    except Exception: info["os"]=platform.platform()
+    info.update({"hostname":socket.gethostname(),"kernel":platform.release(),
+                 "architecture":platform.machine(),"cpu_count":os.cpu_count() or 0})
+    return info
+
 def cpu_freq_mhz():
     for q in ("/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq","/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq"):
         try:return int(Path(q).read_text().strip())/1000.0
@@ -210,7 +245,9 @@ def load_cfg():
     if c.has_section("services"):
         for label,target in c["services"].items():
             target=target.strip()
-            if target and not target.startswith("#"): watches.append(("service",label.upper(),target))
+            paused=c.getboolean("service_monitor_disabled",label,fallback=False)
+            if target and not target.startswith("#") and not paused:
+                watches.append(("service",label.upper(),target))
     if c.has_section("processes"):
         for label,target in c["processes"].items():
             target=target.strip()
@@ -222,6 +259,12 @@ def cf(section,key,default,cast=float):
     try: return cast(cfg.get(section,key))
     except: return default
 
+DEVICE_ID=cf("device","identifier","auto",str).strip()
+if not DEVICE_ID or DEVICE_ID.lower()=="auto": DEVICE_ID=socket.gethostname()
+DEVICE_NAME=cf("device","name",DEVICE_ID,str).strip() or DEVICE_ID
+if DEVICE_NAME.lower()=="auto": DEVICE_NAME=DEVICE_ID
+DEVICE_INFO=device_details()
+
 SENSOR_INTERVAL=cf("timing","sensor_interval",1.0)
 OLED_REFRESH=cf("timing","oled_refresh_interval",1.0)
 PAGE_INTERVAL=cf("timing","page_interval",10.0)
@@ -253,6 +296,20 @@ RGB_WRITE_DELAY_MS=max(1,cf("led","write_delay_ms",10,int))
 WARNING_FLASH=(max(50,cf("led","warning_flash_on_ms",1500,int)),max(50,cf("led","warning_flash_off_ms",1500,int)))
 CRITICAL_FLASH=(max(50,cf("led","critical_flash_on_ms",750,int)),max(50,cf("led","critical_flash_off_ms",750,int)))
 EMERGENCY_FLASH=(max(50,cf("led","emergency_flash_on_ms",300,int)),max(50,cf("led","emergency_flash_off_ms",300,int)))
+NORMAL_MODE=cf("led","normal_mode","off",str).strip().lower()
+NORMAL_MODES={"off","solid","flash","flow","breathe","marquee","rainbow","colorful"}
+if NORMAL_MODE not in NORMAL_MODES: NORMAL_MODE="off"
+NORMAL_COLOR=tuple(max(0,min(255,cf("led",f"normal_{channel}",value,int)))
+                   for channel,value in zip(("r","g","b"),(0,0,0)))
+NORMAL_FLASH=(max(50,cf("led","normal_flash_on_ms",1000,int)),
+              max(50,cf("led","normal_flash_off_ms",1000,int)))
+NORMAL_EFFECT_SPEED=max(1,min(3,cf("led","normal_effect_speed",2,int)))
+NORMAL_EFFECT_COLOR=cf("led","normal_effect_color","green",str).strip().lower()
+RGB_EFFECT_COLORS={"red":0,"green":1,"blue":2,"yellow":3,"purple":4,"cyan":5,"white":6}
+if NORMAL_EFFECT_COLOR not in RGB_EFFECT_COLORS: NORMAL_EFFECT_COLOR="green"
+RGB_EFFECTS={"flow":0,"breathe":1,"marquee":2,"rainbow":3,"colorful":4}
+NORMAL_RGB_MODE={"off":"OFF","solid":"NORMAL_SOLID","flash":"NORMAL_FLASH",
+                 **{name:f"NORMAL_{name.upper()}" for name in RGB_EFFECTS}}[NORMAL_MODE]
 
 def rgb_cfg(name,default):
     return tuple(max(0,min(255,cf("led",f"{name}_{channel}",value,int)))
@@ -290,6 +347,7 @@ def check_watch(w):
 def diagnose():
     print("Agent:")
     print(f"version={APP_VERSION} uptime_seconds={uptime_seconds()} config={CFG}")
+    print(f"machine_id={DEVICE_ID} machine_name={DEVICE_NAME} hostname={socket.gethostname()}")
     print("loop_errors=UNAVAILABLE i2c_errors=UNAVAILABLE scope=separate_diagnostic_process")
     print("System:")
     print(f"load_average={load_average()} cpu_freq_mhz={cpu_freq_mhz():.0f} root_readonly={root_readonly()}")
@@ -302,7 +360,7 @@ def diagnose():
     if "error" in power: print("error="+power["error"])
     iface,kind,metric,label,address=primary_network()
     print("Network:")
-    print(f"primary_interface={iface or 'NONE'} kind={kind} metric={metric} ip_label={label} IP={address} internet={internet()}")
+    print(f"primary_interface={iface or 'NONE'} kind={kind} metric={metric} signal_percent={wifi_percent(metric) if kind=='WIF' else 'N/A'} ip_label={label} IP={address} internet={internet()}")
     print("I2C:")
     # SMBus receive-byte performs a read only; no register selection or display commands.
     try:
@@ -441,6 +499,29 @@ def rgb_flash(mode,on):
         mcu(0x03,channels[2])
     _last_rgb=state
 
+def rgb_static(channels,state_name):
+    global _last_rgb
+    state=(state_name,channels)
+    if _last_rgb==state: return
+    mcu(0x07,0x00); time.sleep(RGB_WRITE_DELAY_MS/1000.0)
+    mcu(0x00,0xff); time.sleep(RGB_WRITE_DELAY_MS/1000.0)
+    mcu(0x01,channels[0]); time.sleep(RGB_WRITE_DELAY_MS/1000.0)
+    mcu(0x02,channels[1]); time.sleep(RGB_WRITE_DELAY_MS/1000.0)
+    mcu(0x03,channels[2])
+    _last_rgb=state
+
+def rgb_normal_effect(mode):
+    global _last_rgb
+    effect_name=mode.removeprefix("NORMAL_").lower()
+    state=("effect",effect_name,NORMAL_EFFECT_SPEED,NORMAL_EFFECT_COLOR)
+    if _last_rgb==state: return
+    # Hardware-calibrated order: speed and color are parameters; the final
+    # effect register write commits and starts the selected MCU animation.
+    mcu(0x05,NORMAL_EFFECT_SPEED); time.sleep(RGB_WRITE_DELAY_MS/1000.0)
+    mcu(0x06,RGB_EFFECT_COLORS[NORMAL_EFFECT_COLOR]); time.sleep(RGB_WRITE_DELAY_MS/1000.0)
+    mcu(0x04,RGB_EFFECTS[effect_name])
+    _last_rgb=state
+
 def render_home(cpu,temp,mem,disk):
     # 128x32 fixed columns. Both columns are LEFT-aligned.
     # Seller 5x7 font has 6px character pitch; right column starts at x=72.
@@ -452,10 +533,11 @@ def render_home(cpu,temp,mem,disk):
         f"DSK {disk:.1f}%",
         ip_label+" "+display_ip,
     ]
+    signal=wifi_percent(net_metric) if net_kind=="WIF" else None
     right=[
         f"MEM {mem:.1f}%",
         f"FAN {FAN_NAME[fan_level]}",
-        f"{net_kind} {net_metric}",
+        f"WIF {signal}%" if signal is not None else f"{net_kind} {net_metric}",
         "",
     ]
     for row in range(4):
@@ -485,7 +567,7 @@ class DisplayController:
         now=time.monotonic()
         self.lock=threading.RLock()
         self.requests={"NORMAL_HOME":{
-            "id":"NORMAL_HOME","priority":0,"severity":0,"rgb_mode":"OFF",
+            "id":"NORMAL_HOME","priority":0,"severity":0,"rgb_mode":NORMAL_RGB_MODE,
             "title":"","l2":"","l3":"","l4":"","active":True,
             "first_seen":now,"last_changed":now,"metadata":{"home":(0.0,0.0,0.0,0.0)},
         }}
@@ -629,7 +711,8 @@ class DisplayController:
             }
 
     def _rgb_worker(self):
-        previous_error=None; applied_mode="OFF"; applied_flash=False; animation_started=time.monotonic()
+        previous_error=None; applied_mode="OFF"; applied_flash=False
+        flash_on=None; animation_started=time.monotonic()
         while not self.stop_event.is_set():
             try:
                 with self.lock: wanted_mode=self.current_rgb_mode
@@ -637,18 +720,30 @@ class DisplayController:
                 if wanted_mode!=applied_mode:
                     with bus_lock:
                         if wanted_mode=="OFF": rgb_off()
-                        elif wanted_flash: rgb_flash(wanted_mode,True)
+                        elif wanted_mode=="NORMAL_SOLID": rgb_static(NORMAL_COLOR,"normal_solid")
+                        elif wanted_mode=="NORMAL_FLASH": rgb_static(NORMAL_COLOR,"normal_flash_on")
+                        elif wanted_mode.startswith("NORMAL_"): rgb_normal_effect(wanted_mode)
+                        elif wanted_flash:
+                            rgb_off()
+                            rgb_flash(wanted_mode,True)
                         else: raise ValueError(f"unsupported RGB mode: {wanted_mode}")
                     log("INFO","RGB_MODE",old=applied_mode,new=wanted_mode)
                     applied_mode=wanted_mode; animation_started=time.monotonic()
+                    flash_on=True if wanted_mode.endswith("_FLASH") else None
                 applied_flash=applied_mode.endswith("_FLASH")
                 if applied_flash:
                     elapsed_ms=(time.monotonic()-animation_started)*1000.0
-                    if "_EMERGENCY_" in applied_mode: on_ms,off_ms=EMERGENCY_FLASH
+                    if applied_mode=="NORMAL_FLASH": on_ms,off_ms=NORMAL_FLASH
+                    elif "_EMERGENCY_" in applied_mode: on_ms,off_ms=EMERGENCY_FLASH
                     elif "_CRITICAL_" in applied_mode: on_ms,off_ms=CRITICAL_FLASH
                     else: on_ms,off_ms=WARNING_FLASH
                     on=elapsed_ms%(on_ms+off_ms)<on_ms
-                    with bus_lock: rgb_flash(applied_mode,on)
+                    if on!=flash_on:
+                        with bus_lock:
+                            if applied_mode=="NORMAL_FLASH":
+                                rgb_static(NORMAL_COLOR,"normal_flash_on") if on else rgb_off()
+                            else: rgb_flash(applied_mode,on)
+                        flash_on=on
                 if previous_error is not None: log("INFO","RGB_RECOVERED")
                 previous_error=None
             except Exception as e:
@@ -677,14 +772,24 @@ def cleanup():
 
 def write_status(cpu,temp,mem,disk):
     display_state=display.status_snapshot()
+    memory_total,memory_used,memory_available,memory_calculated=memory_usage()
+    disk_total,disk_used,disk_free=disk_usage("/")
+    signal=wifi_percent(net_metric) if net_kind=="WIF" else None
     state={
         "version":APP_VERSION,"timestamp":int(time.time()),"uptime_seconds":uptime_seconds(),
+        "machine":{"id":DEVICE_ID,"name":DEVICE_NAME,"hostname":socket.gethostname()},
+        "device":DEVICE_INFO,
         "system":{"load_average":load_average(),"cpu_percent":round(cpu,1),
                   "cpu_freq_mhz":round(cpu_freq_mhz()),"temperature_c":round(temp,1),
-                  "memory_percent":round(mem,1),"disk_percent":round(disk,1),
+                  "memory_percent":round(memory_calculated if memory_total else mem,1),
+                  "memory_total_bytes":memory_total,"memory_used_bytes":memory_used,
+                  "memory_available_bytes":memory_available,
+                  "disk_percent":round(disk,1),"disk_total_bytes":disk_total,
+                  "disk_used_bytes":disk_used,"disk_free_bytes":disk_free,
                   "root_readonly":bool(fs_readonly),"fan_level":fan_level,"fan_name":FAN_NAME[fan_level]},
         "power":health,
         "network":{"interface":net_iface,"kind":net_kind,"metric":net_metric,
+                   "signal_percent":signal,
                    "ip_label":ip_label,"ip":ip,"link":bool(link_ok),"internet":bool(net_ok)},
         "watches":[{"type":w[0],"name":w[1],"target":w[2],"up":bool(ok)}
                    for w,ok in zip(watches,watch_state)],

app/pigway_pi_control_api.py

@@ -1,19 +1,86 @@
 #!/usr/bin/env python3
-import configparser,ipaddress,json,re,secrets,shutil,subprocess,threading,time
+import configparser,ipaddress,json,re,secrets,shutil,subprocess,threading,time,socket
+from concurrent.futures import ThreadPoolExecutor,as_completed
 from http import HTTPStatus
 from http.server import BaseHTTPRequestHandler,ThreadingHTTPServer
 from pathlib import Path
-from urllib.parse import parse_qs,urlparse
+from urllib.parse import parse_qs,urlencode,urlparse
+from urllib.request import Request,urlopen
 
-APP_VERSION="3.6.0"
+APP_VERSION="3.7.0"
 CFG=Path("/etc/pigway-pi-control.conf")
 STATUS=Path("/run/pigway-pi-control/status.json")
 TOKEN=Path("/etc/pigway-pi-control-api.token")
 WEB=Path("/usr/local/share/pigway-pi-control/web/index.html")
-ALLOWED_SECTIONS={"services","processes","alerts","fan","led","timing","dark_mode","display","api"}
+ALLOWED_SECTIONS={"device","hosts","services","processes","alerts","fan","led","timing","dark_mode","display","api"}
 NAME_RE=re.compile(r"^[A-Za-z0-9_.-]{1,64}$")
-RGB_KEY_RE=re.compile(r"^(cpu|power|memory|storage|network|service)_[rgb]$")
-FLASH_KEY_RE=re.compile(r"^(warning|critical|emergency)_flash_(on|off)_ms$")
+UNIT_RE=re.compile(r"^[A-Za-z0-9_.@:-]{1,128}\.service$")
+RGB_KEY_RE=re.compile(r"^(cpu|power|memory|storage|network|service|normal)_[rgb]$")
+FLASH_KEY_RE=re.compile(r"^(warning|critical|emergency|normal)_flash_(on|off)_ms$")
+NORMAL_MODES={"off","solid","flash","flow","breathe","marquee","rainbow","colorful"}
+EFFECT_COLORS={"red","green","blue","yellow","purple","cyan","white"}
+PROTECTED_UNITS={"pigway-pi-control-api.service"}
+
+def machine_identity():
+    cfg=load_cfg(); identifier=cfg.get("device","identifier",fallback="auto").strip()
+    if not identifier or identifier.lower()=="auto": identifier=socket.gethostname()
+    name=cfg.get("device","name",fallback=identifier).strip() or identifier
+    if name.lower()=="auto": name=identifier
+    return {"id":identifier,"name":name,"hostname":socket.gethostname(),"local":True,"url":""}
+
+def normalize_url(value):
+    parsed=urlparse(str(value).strip())
+    if parsed.scheme not in {"http","https"} or not parsed.hostname or parsed.username or parsed.password:
+        raise ValueError("host URL must be an http(s) URL without credentials")
+    return f"{parsed.scheme}://{parsed.netloc}".rstrip("/")
+
+def host_registry():
+    local=machine_identity(); result=[local]
+    cfg=load_cfg()
+    if cfg.has_section("hosts"):
+        for host_id,url in cfg.items("hosts"):
+            try: base=normalize_url(url)
+            except ValueError: continue
+            if host_id==local["id"]: continue
+            result.append({"id":host_id,"name":host_id,"hostname":"","local":False,"url":base})
+    return result
+
+def find_host(host_id):
+    for host in host_registry():
+        if host["id"]==host_id:return host
+    raise ValueError("unknown host")
+
+def remote_json(base,path,method="GET",payload=None,token=""):
+    data=None if payload is None else json.dumps(payload,separators=(",",":")).encode()
+    headers={"Accept":"application/json"}
+    if data is not None: headers["Content-Type"]="application/json"
+    if token: headers["Authorization"]=f"Bearer {token}"
+    request=Request(base+path,data=data,headers=headers,method=method)
+    with urlopen(request,timeout=5) as response:
+        return json.loads(response.read())
+
+def fleet_status():
+    hosts=host_registry(); results=[]
+    try:
+        status=json.loads(STATUS.read_text())
+        status.setdefault("machine",machine_identity())
+        results.append({"host":hosts[0],"online":True,"status":status})
+    except Exception as exc:
+        results.append({"host":hosts[0],"online":False,"error":str(exc)})
+    def fetch(host):
+        try:
+            status=remote_json(host["url"],"/api/v1/status")
+            machine=status.get("machine",{})
+            merged={**host,"name":machine.get("name") or host["name"],"hostname":machine.get("hostname","")}
+            return {"host":merged,"online":True,"status":status}
+        except Exception as exc:return {"host":host,"online":False,"error":str(exc)}
+    peers=hosts[1:]
+    with ThreadPoolExecutor(max_workers=min(8,max(1,len(peers)))) as pool:
+        futures=[pool.submit(fetch,h) for h in peers]
+        for future in as_completed(futures): results.append(future.result())
+    order={h["id"]:i for i,h in enumerate(hosts)}
+    results.sort(key=lambda x:order.get(x["host"]["id"],999))
+    return {"hosts":results,"timestamp":int(time.time())}
 
 def load_cfg():
     cfg=configparser.ConfigParser(); cfg.read(CFG)
@@ -28,7 +95,7 @@ def config_json():
     return {section:dict(cfg.items(section)) for section in cfg.sections() if section in ALLOWED_SECTIONS}
 
 def validate_value(section,key,value,existing):
-    if section not in {"services","processes"} and key not in existing.get(section,set()):
+    if section not in {"services","processes","hosts"} and key not in existing.get(section,set()):
         raise ValueError(f"unsupported option: {section}.{key}")
     if RGB_KEY_RE.fullmatch(key):
         number=int(value)
@@ -36,6 +103,12 @@ def validate_value(section,key,value,existing):
     elif FLASH_KEY_RE.fullmatch(key):
         number=int(value)
         if not 50<=number<=60000: raise ValueError(f"{key} must be 50..60000")
+    elif section=="led" and key=="normal_mode":
+        if value.lower() not in NORMAL_MODES: raise ValueError("normal_mode must be off, solid, flash, flow, breathe, marquee, rainbow or colorful")
+    elif section=="led" and key=="normal_effect_speed":
+        if int(value) not in (1,2,3): raise ValueError("normal_effect_speed must be 1, 2 or 3")
+    elif section=="led" and key=="normal_effect_color":
+        if value.lower() not in EFFECT_COLORS: raise ValueError("normal_effect_color must be red, green, blue, yellow, purple, cyan or white")
     elif section=="api" and key=="port":
         number=int(value)
         if not 1<=number<=65535: raise ValueError("api.port must be 1..65535")
@@ -44,6 +117,42 @@ def validate_value(section,key,value,existing):
         if not 1<=number<=1000: raise ValueError("api.log_limit must be 1..1000")
     elif section=="api" and key=="bind":
         ipaddress.ip_address(value)
+    elif section=="device" and key=="identifier" and value.lower()!="auto" and not NAME_RE.fullmatch(value):
+        raise ValueError("device.identifier must be auto or 1..64 letters, numbers, dot, underscore or dash")
+    elif section=="hosts":
+        normalize_url(value)
+
+def replace_ini_value(section,key,value):
+    text=CFG.read_text()
+    section_match=re.search(rf"(?mi)^\[{re.escape(section)}\]\s*$",text)
+    if not section_match:
+        if value is not None: text=text.rstrip()+f"\n\n[{section}]\n{key} = {value}\n"
+        return text
+    next_section=re.search(r"(?m)^\[.+\]\s*$",text[section_match.end():])
+    end=section_match.end()+(next_section.start() if next_section else len(text)-section_match.end())
+    chunk=text[section_match.end():end]
+    key_match=re.search(rf"(?mi)^\s*{re.escape(key)}\s*=.*(?:\n|$)",chunk)
+    if key_match:
+        start=section_match.end()+key_match.start(); stop=section_match.end()+key_match.end()
+        return text[:start]+((f"{key} = {value}\n") if value is not None else "")+text[stop:]
+    if value is not None:return text[:end].rstrip()+f"\n{key} = {value}\n\n"+text[end:].lstrip("\n")
+    return text
+
+def save_ini_text(text,prefix="api"):
+    parsed=configparser.ConfigParser(); parsed.read_string(text)
+    backup=CFG.with_name(f"{CFG.name}.bak.{prefix}-{time.strftime('%Y%m%d-%H%M%S')}")
+    shutil.copy2(CFG,backup)
+    temporary=CFG.with_suffix(".tmp"); temporary.write_text(text); temporary.chmod(0o644); temporary.replace(CFG)
+    return str(backup)
+
+def edit_host(operation,host_id,url=""):
+    if operation not in {"save","delete"}: raise ValueError("invalid host operation")
+    if not NAME_RE.fullmatch(host_id): raise ValueError("invalid host identifier")
+    local=machine_identity()["id"]
+    if host_id==local: raise ValueError("local host cannot be changed in the remote host list")
+    if operation=="save": url=normalize_url(url)
+    text=replace_ini_value("hosts",host_id,url if operation=="save" else None)
+    return save_ini_text(text,"hosts")
 
 def update_ini(updates):
     if not isinstance(updates,dict): raise ValueError("updates must be an object")
@@ -81,21 +190,165 @@ def update_ini(updates):
     temporary.write_text(text); temporary.chmod(0o644); temporary.replace(CFG)
     return str(backup)
 
-def journal(limit):
-    result=subprocess.run(["journalctl","-u","pigway-pi-control.service","-n",str(limit),
-                           "--no-pager","-o","json"],capture_output=True,text=True,timeout=5)
+def journal_query(since=None,until=None,severity="",event="",search="",sort="timestamp",order="desc",limit=100,offset=0):
+    command=["journalctl","-u","pigway-pi-control.service","--no-pager","-o","json"]
+    if since is not None: command.extend(["--since",f"@{since}"])
+    if until is not None: command.extend(["--until",f"@{until}"])
+    result=subprocess.run(command,capture_output=True,text=True,timeout=15)
     if result.returncode: raise RuntimeError(result.stderr.strip() or "journalctl failed")
     rows=[]
     for line in result.stdout.splitlines():
         try:
             item=json.loads(line)
-            rows.append({"timestamp":item.get("__REALTIME_TIMESTAMP"),"priority":item.get("PRIORITY"),
-                         "message":item.get("MESSAGE","")})
+            message=item.get("MESSAGE","")
+            level_match=re.search(r"(?:^|\s)level=([A-Z]+)(?:\s|$)",message)
+            event_match=re.search(r"(?:^|\s)event=([^ ]+)",message)
+            priority=str(item.get("PRIORITY","6"))
+            level=(level_match.group(1) if level_match else
+                   {"0":"EMERGENCY","1":"ALERT","2":"CRITICAL","3":"ERROR","4":"WARN","5":"NOTICE","6":"INFO","7":"DEBUG"}.get(priority,"INFO"))
+            rows.append({"timestamp":int(item.get("__REALTIME_TIMESTAMP",0)),"priority":priority,
+                         "severity":level,"event":event_match.group(1) if event_match else "SYSTEM",
+                         "message":message})
         except json.JSONDecodeError: pass
-    return rows
+    severities={x.strip().upper() for x in severity.split(",") if x.strip()}
+    if severities: rows=[x for x in rows if x["severity"] in severities]
+    event_types=sorted({x["event"] for x in rows})
+    if event: rows=[x for x in rows if x["event"]==event]
+    if search:
+        needle=search.casefold(); rows=[x for x in rows if needle in x["message"].casefold()]
+    severity_rank={"EMERGENCY":0,"ALERT":1,"CRITICAL":2,"ERROR":3,"WARN":4,"NOTICE":5,"INFO":6,"DEBUG":7}
+    keys={"timestamp":lambda x:x["timestamp"],"severity":lambda x:severity_rank.get(x["severity"],99),
+          "event":lambda x:x["event"],"message":lambda x:x["message"]}
+    rows.sort(key=keys[sort],reverse=order=="desc")
+    total=len(rows)
+    return {"logs":rows[offset:offset+limit],"total":total,"offset":offset,"limit":limit,
+            "event_types":event_types,"retention":"systemd-journal"}
+
+def fleet_journal_query(since=None,until=None,severity="",event="",search="",machine="",
+                        sort="timestamp",order="desc",limit=100,offset=0):
+    hosts=host_registry(); rows=[]; event_types=set(); machines=[]
+    def decorate(payload,host):
+        machine_info=payload.get("machine") or {"id":host["id"],"name":host["name"]}
+        host_id=machine_info.get("id") or host["id"]
+        host_name=machine_info.get("name") or host["name"]
+        decorated=[]
+        for row in payload.get("logs",[]):
+            decorated.append({**row,"machine_id":host_id,"machine_name":host_name})
+        return decorated,set(payload.get("event_types",[])),{"id":host_id,"name":host_name}
+    local_payload=journal_query(since,until,severity,event,search,"timestamp","desc",50000,0)
+    local_payload["machine"]=machine_identity()
+    local_rows,local_events,local_machine=decorate(local_payload,hosts[0])
+    rows.extend(local_rows); event_types.update(local_events); machines.append(local_machine)
+    query={"limit":50000,"offset":0,"sort":"timestamp","order":"desc"}
+    for key,value in (("since",since),("until",until),("severity",severity),("event",event),("search",search)):
+        if value not in (None,""): query[key]=value
+    def fetch(host):
+        payload=remote_json(host["url"],"/api/v1/logs?"+urlencode(query))
+        try:
+            status=remote_json(host["url"],"/api/v1/status")
+            payload["machine"]=status.get("machine",{})
+        except Exception: pass
+        return decorate(payload,host)
+    peers=hosts[1:]
+    with ThreadPoolExecutor(max_workers=min(8,max(1,len(peers)))) as pool:
+        futures=[pool.submit(fetch,h) for h in peers]
+        for future in as_completed(futures):
+            try:
+                remote_rows,remote_events,remote_machine=future.result()
+                rows.extend(remote_rows); event_types.update(remote_events); machines.append(remote_machine)
+            except Exception: pass
+    if machine: rows=[row for row in rows if row["machine_id"]==machine]
+    severity_rank={"EMERGENCY":0,"ALERT":1,"CRITICAL":2,"ERROR":3,"WARN":4,"NOTICE":5,"INFO":6,"DEBUG":7}
+    keys={"timestamp":lambda x:x["timestamp"],"severity":lambda x:severity_rank.get(x["severity"],99),
+          "event":lambda x:x["event"],"message":lambda x:x["message"],
+          "machine":lambda x:(x["machine_name"],x["machine_id"])}
+    rows.sort(key=keys[sort],reverse=order=="desc")
+    total=len(rows)
+    return {"logs":rows[offset:offset+limit],"total":total,"offset":offset,"limit":limit,
+            "event_types":sorted(event_types),"machines":sorted(machines,key=lambda x:(x["name"],x["id"])),
+            "retention":"systemd-journal"}
+
+def service_inventory():
+    cfg=load_cfg()
+    monitored={target.lower():(name,target) for name,target in cfg.items("services")} if cfg.has_section("services") else {}
+    notes=dict(cfg.items("service_notes")) if cfg.has_section("service_notes") else {}
+    files=subprocess.run(["systemctl","list-unit-files","--type=service","--no-legend","--no-pager"],
+                         capture_output=True,text=True,timeout=10,check=True)
+    units={}
+    for line in files.stdout.splitlines():
+        parts=line.split()
+        if len(parts)>=2 and UNIT_RE.fullmatch(parts[0]):
+            units[parts[0]]={"unit":parts[0],"enabled":parts[1],"active":"inactive","description":""}
+    states=subprocess.run(["systemctl","list-units","--all","--type=service","--no-legend","--no-pager","--plain"],
+                          capture_output=True,text=True,timeout=10,check=True)
+    for line in states.stdout.splitlines():
+        parts=line.split(None,4)
+        if len(parts)>=4 and UNIT_RE.fullmatch(parts[0]):
+            item=units.setdefault(parts[0],{"unit":parts[0],"enabled":"unknown"})
+            item.update({"active":parts[2],"description":parts[4] if len(parts)>4 else ""})
+    for name,target in monitored.values():
+        item=units.setdefault(target,{"unit":target,"enabled":"not-found","active":"inactive","description":""})
+        paused=cfg.getboolean("service_monitor_disabled",name,fallback=False)
+        item.update({"monitored":True,"paused":paused,"monitor_name":name.upper(),"note":notes.get(name,"")})
+    for item in units.values():
+        item.setdefault("monitored",False); item.setdefault("paused",False)
+        item.setdefault("monitor_name",""); item.setdefault("note","")
+        item["protected"]=item["unit"] in PROTECTED_UNITS
+    return sorted(units.values(),key=lambda x:(not x["monitored"],x["unit"]))
+
+def edit_service_monitor(operation,name,target,note="",previous_name=""):
+    if operation not in {"save","delete","pause","resume"}: raise ValueError("invalid monitor operation")
+    if not NAME_RE.fullmatch(name): raise ValueError("invalid monitor name")
+    if not UNIT_RE.fullmatch(target): raise ValueError("invalid systemd service name")
+    if len(note)>120 or any(c in note for c in "\r\n\x00"): raise ValueError("invalid note")
+    if previous_name and not NAME_RE.fullmatch(previous_name): raise ValueError("invalid previous monitor name")
+    cfg=load_cfg(); old_target=cfg.get("services",name,fallback=None)
+    previous=previous_name or name
+    was_paused=cfg.getboolean("service_monitor_disabled",previous,fallback=False)
+    text=CFG.read_text()
+    def change(section,key,value):
+        nonlocal text
+        section_match=re.search(rf"(?mi)^\[{re.escape(section)}\]\s*$",text)
+        if not section_match:
+            if value is not None: text=text.rstrip()+f"\n\n[{section}]\n{key} = {value}\n"
+            return
+        next_section=re.search(r"(?m)^\[.+\]\s*$",text[section_match.end():])
+        end=section_match.end()+(next_section.start() if next_section else len(text)-section_match.end())
+        chunk=text[section_match.end():end]
+        key_match=re.search(rf"(?mi)^\s*{re.escape(key)}\s*=.*(?:\n|$)",chunk)
+        if key_match:
+            start=section_match.end()+key_match.start(); stop=section_match.end()+key_match.end()
+            text=text[:start]+((f"{key} = {value}\n") if value is not None else "")+text[stop:]
+        elif value is not None:
+            text=text[:end].rstrip()+f"\n{key} = {value}\n\n"+text[end:].lstrip("\n")
+    if operation=="delete":
+        if old_target is None: raise ValueError("monitor not found")
+        change("services",name,None); change("service_notes",name,None); change("service_monitor_disabled",name,None)
+    elif operation in {"pause","resume"}:
+        if old_target is None: raise ValueError("monitor not found")
+        change("service_monitor_disabled",name,"true" if operation=="pause" else None)
+    else:
+        if previous_name and previous_name.lower()!=name.lower():
+            change("services",previous_name,None); change("service_notes",previous_name,None)
+            change("service_monitor_disabled",previous_name,None)
+        change("services",name,target); change("service_notes",name,note or None)
+        if was_paused: change("service_monitor_disabled",name,"true")
+    parsed=configparser.ConfigParser(); parsed.read_string(text)
+    backup=CFG.with_name(f"{CFG.name}.bak.api-{time.strftime('%Y%m%d-%H%M%S')}")
+    shutil.copy2(CFG,backup)
+    temporary=CFG.with_suffix(".tmp"); temporary.write_text(text); temporary.chmod(0o644); temporary.replace(CFG)
+    subprocess.run(["systemctl","restart","pigway-pi-control.service"],check=True,timeout=10)
+    return str(backup)
+
+def control_service(unit,action):
+    if not UNIT_RE.fullmatch(unit): raise ValueError("invalid systemd service name")
+    if action not in {"start","stop"}: raise ValueError("action must be start or stop")
+    if unit in PROTECTED_UNITS and action=="stop": raise ValueError("protected remote-management service cannot be stopped here")
+    result=subprocess.run(["systemctl",action,unit],capture_output=True,text=True,timeout=20)
+    if result.returncode: raise RuntimeError(result.stderr.strip() or f"systemctl {action} failed")
 
 class Handler(BaseHTTPRequestHandler):
-    server_version="PigwayAPI/3.6"
+    server_version="PIGWayAPI/3.7"
 
     def log_message(self,fmt,*args):
         return
@@ -130,22 +383,86 @@ class Handler(BaseHTTPRequestHandler):
                 self.send_header("Content-Length",str(len(data))); self.security_headers(); self.end_headers(); self.wfile.write(data); return
             if parsed.path=="/api/v1/health":
                 self.send_json(200,{"ok":True,"version":APP_VERSION,"status_available":STATUS.exists()}); return
+            if parsed.path=="/api/v1/hosts":
+                self.send_json(200,{"hosts":host_registry()}); return
+            if parsed.path=="/api/v1/fleet/status":
+                self.send_json(200,fleet_status()); return
             if parsed.path=="/api/v1/status":
                 if not STATUS.exists(): self.send_json(503,{"error":"agent status unavailable"}); return
                 self.send_json(200,json.loads(STATUS.read_text())); return
-            if parsed.path=="/api/v1/logs":
-                limit=min(max(int(parse_qs(parsed.query).get("limit",[api_setting("log_limit",200,int)])[0]),1),1000)
-                self.send_json(200,{"logs":journal(limit)}); return
+            if parsed.path in {"/api/v1/logs","/api/v1/fleet/logs"}:
+                query=parse_qs(parsed.query)
+                value=lambda key,default="":query.get(key,[default])[0]
+                limit=min(max(int(value("limit",api_setting("log_limit",200,int))),1),50000)
+                offset=max(int(value("offset",0)),0)
+                since=int(value("since")) if value("since") else None
+                until=int(value("until")) if value("until") else None
+                if since is not None and until is not None and since>until: raise ValueError("since must not be after until")
+                sort=value("sort","timestamp"); order=value("order","desc")
+                allowed_sort={"timestamp","severity","event","message"}
+                if parsed.path=="/api/v1/fleet/logs": allowed_sort.add("machine")
+                if sort not in allowed_sort: raise ValueError("invalid log sort")
+                if order not in {"asc","desc"}: raise ValueError("invalid log order")
+                severity=value("severity").upper(); event=value("event"); search=value("search")
+                if len(event)>80 or len(search)>120: raise ValueError("log filter is too long")
+                if parsed.path=="/api/v1/fleet/logs":
+                    self.send_json(200,fleet_journal_query(since,until,severity,event,search,value("machine"),sort,order,limit,offset)); return
+                self.send_json(200,journal_query(since,until,severity,event,search,sort,order,limit,offset)); return
             if parsed.path=="/api/v1/config":
-                self.send_json(200,{"config":config_json(),"write_requires_token":True}); return
+                query=parse_qs(parsed.query); host_id=query.get("host",[""])[0]
+                if host_id and host_id!=machine_identity()["id"]:
+                    host=find_host(host_id); self.send_json(200,remote_json(host["url"],"/api/v1/config")); return
+                self.send_json(200,{"config":config_json(),"write_requires_token":True,"machine":machine_identity()}); return
+            if parsed.path=="/api/v1/services":
+                query=parse_qs(parsed.query); host_id=query.get("host",[""])[0]
+                if host_id and host_id!=machine_identity()["id"]:
+                    host=find_host(host_id); self.send_json(200,remote_json(host["url"],"/api/v1/services")); return
+                self.send_json(200,{"services":service_inventory(),"machine":machine_identity()}); return
             self.send_json(404,{"error":"not found"})
+        except ValueError as e: self.send_json(400,{"error":str(e)})
         except Exception as e: self.send_json(500,{"error":str(e)})
 
     def do_PUT(self):
-        if urlparse(self.path).path!="/api/v1/config": self.send_json(404,{"error":"not found"}); return
+        path=urlparse(self.path).path
+        if path not in {"/api/v1/config","/api/v1/services","/api/v1/services/control","/api/v1/hosts","/api/v1/fleet/config"}: self.send_json(404,{"error":"not found"}); return
         if not self.authorized(): self.send_json(401,{"error":"bearer token required"}); return
         try:
-            body=self.read_json(); updates=body.get("updates")
+            body=self.read_json()
+            if path=="/api/v1/hosts":
+                backup=edit_host(str(body.get("operation","")),str(body.get("id","")),str(body.get("url","")))
+                self.send_json(200,{"ok":True,"backup":backup,"hosts":host_registry()}); return
+            if path=="/api/v1/fleet/config":
+                updates=body.get("updates"); targets=body.get("targets",[]); tokens=body.get("tokens",{})
+                if not isinstance(targets,list) or not targets or len(targets)>32: raise ValueError("targets must contain 1..32 host identifiers")
+                if not isinstance(tokens,dict): raise ValueError("tokens must be an object")
+                results=[]; local_id=machine_identity()["id"]; restart_local_api=False
+                for host_id in dict.fromkeys(str(x) for x in targets):
+                    try:
+                        if host_id==local_id:
+                            backup=update_ini(updates)
+                            subprocess.run(["systemctl","restart","pigway-pi-control.service"],check=True,timeout=10)
+                            restart_local_api="api" in updates
+                            results.append({"id":host_id,"ok":True,"backup":backup})
+                        else:
+                            host=find_host(host_id); token=str(tokens.get(host_id,""))
+                            if not token: raise ValueError("remote bearer token required")
+                            response=remote_json(host["url"],"/api/v1/config","PUT",{"updates":updates},token)
+                            results.append({"id":host_id,"ok":True,"backup":response.get("backup","")})
+                    except Exception as exc: results.append({"id":host_id,"ok":False,"error":str(exc)})
+                self.send_json(200,{"ok":all(x["ok"] for x in results),"results":results})
+                if restart_local_api: threading.Timer(0.2,self.server.shutdown).start()
+                return
+            if path=="/api/v1/services/control":
+                control_service(str(body.get("unit","")),str(body.get("action","")))
+                print(f"SERVICE_CONTROL action={body.get('action')} unit={body.get('unit')}",flush=True)
+                self.send_json(200,{"ok":True}); return
+            if path=="/api/v1/services":
+                backup=edit_service_monitor(str(body.get("operation","")),str(body.get("name","")),
+                                            str(body.get("target","")),str(body.get("note","")),
+                                            str(body.get("previous_name","")))
+                print(f"SERVICE_MONITOR_UPDATED operation={body.get('operation')} target={body.get('target')} backup={backup}",flush=True)
+                self.send_json(200,{"ok":True,"backup":backup}); return
+            updates=body.get("updates")
             backup=update_ini(updates)
             subprocess.run(["systemctl","restart","pigway-pi-control.service"],check=True,timeout=10)
             restart_api="api" in updates

config/pigway-pi-control.conf

@@ -1,5 +1,5 @@
 # =============================================================================
-# Pigway Pi Control v3.6.0 - 用户配置文件
+# PIGWay Pi Control v3.7.0 - 用户配置文件
 # =============================================================================
 #
 # 正式安装后的配置路径：
@@ -25,6 +25,22 @@
 # =============================================================================
 
 
+[device]
+# 多机监控中使用的稳定机器标识。auto 表示读取本机 hostname。
+# 多台机器的 identifier 必须唯一；修改后重启硬件 Agent 和 API 服务。
+identifier = auto
+
+# Web 页面显示名称。auto 表示使用 identifier。
+name = auto
+
+
+[hosts]
+# 在作为聚合入口的机器上登记其他节点，每行格式：
+# 唯一标识 = http://节点IP:6001
+# 示例：
+# living-room = http://192.168.1.20:6001
+
+
 [api]
 # API 与 Web 使用同一监听地址和端口。0.0.0.0 允许局域网访问；
 # 如只允许本机访问可改为 127.0.0.1。修改后重启 API 服务生效。
@@ -147,6 +163,34 @@ wifi_weak_seconds = 30
 
 
 [led]
+# 正常运行、没有任何 active alert 时的 RGB 表现：
+#   off      = 全灭（默认，最安静且 I2C 写入最少）
+#   solid    = 三灯使用 normal_r/g/b 自定义颜色常亮
+#   flash    = 三灯使用 normal_r/g/b 和 normal_flash_*_ms 自定义颜色闪烁
+#   flow     = MCU 内置流水灯；使用有限颜色和速度
+#   breathe  = MCU 内置呼吸灯；使用有限颜色和速度
+#   marquee  = MCU 内置跑马灯；MCU 自行决定颜色变化
+#   rainbow  = MCU 内置彩虹灯；MCU 自行决定颜色变化
+#   colorful = MCU 内置炫彩灯；MCU 自行决定颜色变化
+# 任何 active alert 都会立即抢占正常效果；全部恢复后才重新应用这里的模式。
+normal_mode = off
+
+# solid / flash 自定义颜色，三通道范围均为 0..255。
+normal_r = 0
+normal_g = 0
+normal_b = 0
+
+# flash 亮灯/灭灯时间，单位毫秒；范围 50..60000。
+normal_flash_on_ms = 1000
+normal_flash_off_ms = 1000
+
+# MCU 内置效果速度：1=慢，2=中（默认），3=快。
+normal_effect_speed = 2
+# flow / breathe 可使用的 MCU 内置有限颜色：
+# red / green / blue / yellow / purple / cyan / white
+# marquee / rainbow / colorful 会忽略该颜色值。
+normal_effect_color = green
+
 # DisplayController 按集中定义的 priority 仲裁 owner。告警页显示时 RGB 同步显示
 # 该页对象；主页使用最高优先级 active owner。颜色表示对象，速度表示严重等级：
 #   CPU/频率/温度/散热 = 红色
@@ -183,8 +227,6 @@ critical_flash_on_ms = 750
 critical_flash_off_ms = 750
 emergency_flash_on_ms = 300
 emergency_flash_off_ms = 300
-# NORMAL_HOME 为 owner 时 RGB OFF。
-#
 # 每次点亮使用 v3.2.0 已验证的 selector -> R -> G -> B 完整写入顺序，
 # 只在亮/灭边沿访问 MCU，不做高频软件 PWM。
 write_delay_ms = 10
@@ -199,7 +241,7 @@ write_delay_ms = 10
 # Raspberry Pi 4 板载 PWR / ACT LED。
 # 本机硬件只支持开/关，不支持真正的 PWM 调暗。
 #
-# off = Pigway Pi Control 启动时关闭该灯。
+# off = PIGWay Pi Control 启动时关闭该灯。
 # 若不希望程序干预，可改为 on。
 #
 # 注意：
@@ -245,6 +287,12 @@ AWESUN = runawesun.service
 # NGINX = nginx.service
 
 
+[service_monitor_disabled]
+# Web 中“暂停监控”的状态保存在这里。
+# 名称对应 [services] 左侧名称；true 表示保留配置和备注，但 Agent 暂不检查。
+# 通常由 Web 自动维护，无需手工编辑。
+
+
 [processes]
 # =============================================================================
 # 普通进程监控

install.sh

@@ -2,6 +2,19 @@
 set -euo pipefail
 cd "$(dirname "$0")"
 
+FORCE_I2C_CONFLICT=0
+for arg in "$@"; do
+  case "$arg" in
+    --force-i2c-conflict) FORCE_I2C_CONFLICT=1 ;;
+    -h|--help)
+      echo "Usage: sudo ./install.sh [--force-i2c-conflict]"
+      echo "  --force-i2c-conflict  Continue even when another process owns /dev/i2c-1."
+      exit 0
+      ;;
+    *) echo "ERROR: unknown option: $arg" >&2; exit 2 ;;
+  esac
+done
+
 for required in app/pigway_pi_control.py app/pigway_pi_control_api.py app/oled_font_5x7.bin web/index.html config/pigway-pi-control.conf systemd/pigway-pi-control.service systemd/pigway-pi-control-api.service; do
   if [ ! -f "$required" ]; then
     echo "ERROR: required file missing: $required" >&2
@@ -30,13 +43,22 @@ i2c_conflict_pids() {
 
 I2C_CONFLICTS="$(i2c_conflict_pids)"
 if [ -n "$I2C_CONFLICTS" ]; then
+  if [ "$FORCE_I2C_CONFLICT" -eq 1 ]; then
+    echo "WARNING: /dev/i2c-1 is already in use by another process:" >&2
+  else
     echo "ERROR: /dev/i2c-1 is already in use by another process:" >&2
+  fi
   while read -r pid; do
     ps -p "$pid" -o pid=,user=,comm=,args= >&2 || true
   done <<< "$I2C_CONFLICTS"
+  if [ "$FORCE_I2C_CONFLICT" -eq 1 ]; then
+    echo "WARNING: continuing because --force-i2c-conflict was specified; no conflicting process will be stopped." >&2
+  else
     echo "Stop or reconfigure the conflicting OLED/LED controller, then run the installer again." >&2
+    echo "If concurrent control is intentional, rerun with --force-i2c-conflict." >&2
     exit 1
   fi
+fi
 
 echo "[2/8] 等待 APT/DPKG..."
 for i in $(seq 1 60); do
@@ -80,7 +102,14 @@ from pathlib import Path
 path=Path(sys.argv[1])
 text=path.read_text()
 sections={
+"device":(("identifier","auto"),("name","auto")),
+"hosts":(),
 "led":(
+    ("normal_mode","off"),
+    ("normal_r",0),("normal_g",0),("normal_b",0),
+    ("normal_flash_on_ms",1000),("normal_flash_off_ms",1000),
+    ("normal_effect_speed",2),("normal_effect_color","green"),
+    ("write_delay_ms",10),
     ("cpu_r",255),("cpu_g",0),("cpu_b",0),
     ("power_r",255),("power_g",40),("power_b",0),
     ("memory_r",255),("memory_g",0),("memory_b",255),
@@ -107,6 +136,10 @@ for section,defaults in sections.items():
              if not re.search(rf"(?m)^\s*{re.escape(key)}\s*=",chunk)]
     if missing:
         note="# Added by installer; existing user values are preserved.\n"
+        if section=="led" and any(key.startswith("normal_") for key,_ in missing):
+            note+=("# Normal RGB: normal_mode = off/solid/flash/flow/breathe/marquee/rainbow/colorful.\n"
+                   "# normal_r/g/b = 0..255; normal_flash_*_ms = 50..60000; effect speed = 1..3.\n"
+                   "# Effect color = red/green/blue/yellow/purple/cyan/white (flow/breathe only).\n")
         block=note+"".join(f"{key} = {value}\n" for key,value in missing)
         text=text[:end].rstrip()+"\n"+block+"\n\n"+text[end:].lstrip("\n")
 path.write_text(text)
@@ -132,18 +165,22 @@ echo "[7/8] 安装后自检..."
 FAIL=0
 check() { local label="$1"; shift; if "$@"; then printf "  %-30s PASS\n" "$label"; else printf "  %-30s FAIL\n" "$label"; FAIL=1; fi; }
 APP=/usr/local/sbin/pigway-pi-control
-check "Version 3.6.0" grep -Fq 'APP_VERSION="3.6.0"' "$APP"
+check "Version 3.7.0" grep -Fq 'APP_VERSION="3.7.0"' "$APP"
 check "OLED physical 128x32" grep -Fq 'W,H=128,32' "$APP"
 check "OLED MUX 0x1F" grep -Fq '0xA8,0x1F' "$APP"
 check "OLED pages 0..3" grep -Fq 'cmd(0x22);cmd(0);cmd(3)' "$APP"
 check "UI CPU/TMP/DSK" grep -Fq 'f"TMP {temp:.1f}C"' "$APP"
 check "UI IP4/IP6" grep -Fq 'ip_label' "$APP"
 check "UI right column x=72" grep -Fq 'draw_text_5x7(pix,72,y,right[row])' "$APP"
+if [ "$FORCE_I2C_CONFLICT" -eq 1 ]; then
+  printf "  %-30s WARN (forced)\n" "I2C owner conflict"
+else
   no_other_i2c_owner() { [ -z "$(i2c_conflict_pids)" ]; }
   check "No other I2C owner" no_other_i2c_owner
+fi
 check "Service running" systemctl is-active --quiet pigway-pi-control.service
 check "API/Web service running" systemctl is-active --quiet pigway-pi-control-api.service
-check "API/Web version 3.6.0" grep -Fq 'APP_VERSION="3.6.0"' /usr/local/sbin/pigway-pi-control-api
+check "API/Web version 3.7.0" grep -Fq 'APP_VERSION="3.7.0"' /usr/local/sbin/pigway-pi-control-api
 check "Web UI installed" test -s /usr/local/share/pigway-pi-control/web/index.html
 check "P0 health monitor" grep -Fq 'throttled_state' "$APP"
 check "Diagnostic command" grep -Fq -- '--diagnose' "$APP"

systemd/pigway-pi-control-api.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Pigway Pi Control API and Web
+Description=PIGWay Pi Control API and Web
 After=network.target pigway-pi-control.service
 Wants=network.target pigway-pi-control.service
 

systemd/pigway-pi-control.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Pigway Raspberry Pi OLED/Fan/RGB Monitor
+Description=PIGWay Raspberry Pi OLED/Fan/RGB Monitor
 After=multi-user.target network.target
 Wants=network.target